10A6-T

10A05 THRU 10A10 SILICON RECTIFIER VOLTAGE RANGE 1000 Volts CURRENT 10 Amperes FEATURES * * * * * High surge current capability Low leakage Low forward voltage drop High current capability Low lost R-6 MECHANICAL DATA * * * * * Case: Molded plastic black body Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.08 gram .052 (1.3) 1.0 (25.4) MIN. DIA. .048 (1.2) .360 (9.1) .340 (8.6) .360 (9.1) .340 (8.6) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS DIA. 1.0 (25.4) MIN. Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RATINGS Maximum Recurrent Peak Reverse Voltage 10A05 10A1 10A2 VRRM VRMS Maximum RMS Voltage o Maximum Average Forward Rectified Current at T A = 50 C Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 10A8 10A10 UNITS Volts Volts 1000 Volts IO 10 Amps I FSM 400 Amps 2 IT Typical Current Squared Time 10A6 700 VDC Maximum DC Blocking Voltage 10A4 1000 A 2S 664 Typical Thermal Resistance (Note 3) RθJA 20 0 Typical Thermal Resistance (Note 4) RθJL 4 0 Typical Thermal Resistance (Note 5) RθJC 6 CJ 135 T J, TSTG -55 to + 150 Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range C/W C/W 0 C/W pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Forward Voltage at 10A DC Maximum DC Average Reverse Current at Rated DC Blocking Voltage VF o @T A = 25 C o @T A = 150 C Maximum Full Load Reverse Current Average Full Cycle .375" (9.5mm) Lead Length at T L =75 OC NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. “ ROHS compliant”. 3. Thernal Resistance: At 9.5mm lead lengths,PCB mounted. 4. Thernal Resistance Junction to lead 5. Thernal Resistance Junction to dice IR 10A05 10A1 10A2 10A4 10A6 10A8 10A10 UNITS 1.1 Volts 5 2 uAmps mAmps 50 uAmps 2019-02 REV:B RATING AND CHARACTERISTICS CURVES ( 10A05 THRU 10A10 ) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 10 8 6 4 Single Phase Half Wave 60Hz Resistive or Inductive Load 2 0 250 50 75 100 125 150 500 8.3ms Single Half Sine-Wave (JEDED Method) 400 300 200 100 0 0 175 2 86 10 20 40 60 80 100 FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE FIG.2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 10 TJ = 25 OC 1.0 Pulse Width = 300ms 1% Duty Cycle 0.1 0.5 1.0 1.5 2.0 2.5 3.0 INSTANTANEOUS REVERSE CURRENT, (uA) NUMBER OF CYCLES AT 60Hz 100 0 4 AMBIENT TEMPERATURE, ( C) 10000 TA = 150 OC 1000 10 1 TA = 25 OC 0 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 FIG.4 MAXIMUM REVERSE CHARACTERISTICS 25 20 15 10 5 0 0 0.1 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS THERMAL RESISTANCE, (OC/W) INSTANTANEOUS FORWARD CURRENT, (A) O 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 EQUAL LEAD LENGTH TO HEAT SINK, (IN.) FIG.5 TYPICAL THERMAL RESISTANCE vs. LEAD LENGTH 140 RECTRON Attachment information about 10AX 1. Internal Circuit Anode Cathode 2. Marking on the body Plant - code Rectron Logo Part No. V X X 1 0 A H Cathode Band Year - code (Y: Last digit of year & A:2010,B:2011......) Month - code (M:1~9,O,N,D) Voltage-code H---for all Voltage rang PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE R-6/R-7 -B EA PER BOX INNER BOX SIZE (mm) 200 300*73*40 CARTON SIZE EA PER CARTON (mm) GROSS WEIGHT(Kg) 347*320*271 12.93/14.57 4,800 REEL PACK PACKAGE R-6/R-7 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 800 9.5 800 52 330 355*350*335 3,200 9.72/9.91 AMMO PACK PACKAGE PACKING CODE R-6/R-7 -F REEL ( EA ) 300 COMPONENT TAPE SPACE SPACE(mm) (mm) 9.5 52 BOX SIZE (mm) CARTON SIZE(mm) 255*73*100 400*268*225 CARTON ( EA ) 3,000 GROSS WEIGHT (Kg) 8.5/8.7 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.