15FMCJ68A

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION TVS 1.5FMCJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 5.0 WATT STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory Glass passivated chip construction 1500 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time DO-214AB MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types 1.5FMCJ6.8 thru 1.5FMCJ400 Electrical characteristics apply in both direction MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS Peak Power Dissipation with a 10/1000uS ( Note 1,2, Fig.1 ) Peak Pulse Current with a 10/1000uS Waveform ( Note 1, Fig.3 ) Steady State Power Dissipation at T L = 7 5oC ( Note 2 ) Peak Forward Surge Current, 8.3ms single half sine wavesuperimmposed on rated load( JEDEC METHOD )( Note 2,3 ) Maximum Instantaneous Forward Voltage at 50A for unidirectional only ( Note 3,4 ) Operating and Storage Temperature Range o SYMBOL P PPM I PPM P M(AV) I FSM VF T J , T STG VALUE Minimum 1500 SEE TABLE 1 5.0 100 SEE NOTES 4 -65 to + 175 UNITS Watts Amps Watts Amps Volts 0 C 1998-8 NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 C per Fig.2. 2. Mounted on 0.31 X 0.31” (8.0 X 8.0mm) copper pads to each terminal. 3. Measured on 8.3mS single half sine-wave or equivaient square wave, duty cycle = 4 pulses per minute maximum. 4. VF = 3.5V on 1.5FMCJ6.8 thru 1.5FMCJ90 diveces and VF = 5.0V on 1.5FMCJ100 thru 1.5FMCJ400 devices. RECTRON RECTRON RECTRON