1N4006W

1N4001W THRU 1N4007W SURFACE MOUNT GENERAL PURPOSE SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any P INNING PIN * P/N suffix V means AEC-Q101 qualified e.g:1N4001WV * P/N suffix V means Halogen-free DESCRIPTION 1 Cathode 2 Anode 1 2 MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 * Terminals: Solderable per MIL-STD-750, Method 2026 TopView MarkingCode͹A1-A7 SimplifiedoutlineSOD-123F(L) and  symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) 1N4007W UNITS SYMBOL 1N4001W 1N4002W 1N4003W 1N4004W 1N4005W 1N4006W Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Ambient Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 1.0 Amps I FSM 30 Amps 3.7 A 2 /Sec 2 I t Current Squarad Time Volts IO 0 Typical Thermal Resistance (Note 1) R JA Typical Junction Capacitance (Note 2) CJ 8 Operating Temperature Range TJ -55 to + 150 0 C T STG -55 to + 150 0 C Storage Temperature Range 90 C/W pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 150 o C SYMBOL 1N4001W VF IR NOTES : 1. Thermal Resistance :Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 1N4002W 1N4003W 1N4004W 1N4005W 1N4006W 1N4007W UNITS 1.1 Volts 5.0 uA 1.0 mA 2020-01 REV:C RATING AND CHARACTERISTICS CURVES ( 1N4001W THRU 1N4007W) Fig.2 Typical Instaneous Reverse Characteristics Average Forward Current (A) 1.2 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60 Hz resistive or inductive load 0.0 25 50 75 100 125 150 175 Instaneous Reverse Current ( μ A) Fig.1 Forward Current Derating Curve 100 T J=150°C T J=125°C 10 1.0 T J=75°C 0.1 T J =25°C 0.01 0 Junction Capacitance ( pF) TJ = 2 5° C TJ = 10 15 0°C 0°C 0.5 TJ = Instaneous Forward Current (A) 1.0 0.9 600 800 Fig.4 Typical Junction Capacitance F ig.3 Typical Forward Characteristic 0.8 400 Instaneous Reverse Voltage (V) Case Temperature (°C) 0.2 0.1 0.5 200 100 T J=25°C 10 1 0.6 0.7 1.0 1.1 0.1 1.0 10 100 Reverse Voltage (V) Instaneous Forward Voltage (V) Peak Forward Surage Current (A) Fig.5 Maximum Non-Repetitive Peak Forward Surage Current 35 30 25 20 15 10 05 00 8.3 ms Single Half Sine Wave (JEDEC Method) 1 10 100 Number of Cycles " " " "" " " PACKAGE OUTLINE SOD-123F( L ) Dimensions in inches and (millimeters) The recommended mounting pad size M arking Type number Marking code 1N4001W A1 1N4002W A2 1N4003W A3 1N4004W A4 1N4005W A5 Symbol Unit (mm) Unit (inch) 1N4006W A6 A 1.2 0.048 1N4007W A7 B 1.15 0.045 C 3.10 0.122 D E 1.95 4.25 0.077 0.167 " " " "" " " PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SOD-123F(L) PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W/T 3,000 15,000 --- --- 178 390*205*310 120,000 6.964 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.