1N5817-B

1N5817 THRU 1N5819 SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 40 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * Low power loss, high efficiency Low leakage Low forward voltage High current capability High speed switching High surge capabitity High reliability DO-41 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.33 gram .034 (0.9) 1.0 (25.4) .028 (0.7) DIA. MIN. .205 (5.2) .166 (4.2) .107 (2.7) .080 (2.0) DIA. 1.0 (25.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MIN. Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL 1N5817 1N5818 1N5819 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 Volts Maximum RMS Voltage VRMS 14 21 28 Volts VDC 20 30 40 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375” (9.5mm) lead length at T L =90 OC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Thermal Resistance (Note 3) IO 1.0 Amps I FSM 25 Amps 2 I T 2.5 A 2S RθJA 50 RθJL 15 0 C/W Typical Junction Capacitance (Note 1) CJ 110 Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Storage Temperature Range pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) SYMBOL 1N5817 1N5818 1N5819 UNITS Maximum Instantaneous Forward Voltage at 1.0A DC VF .45 .55 .60 Volts Maximum Instantaneous Forward Voltage at 3.1A DC VF .75 0.875 0.90 CHARACTERISTICS Maximum Average Reverse Current o @T A = 25 C at Rated DC Blocking Voltage @T A = 100o C NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. 3. Thermal Resistance : At 9.5mm lead lengths, PCB mounted. IR Volts 0.2 mAmps 10 mAmps 2009-10 REV:A AVERAGE FORWARD CURRENT, (A) 1.0 0.8 0.6 Single Half Wave 60HZ Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0.4 0.2 0 25 50 75 100 125 150 175 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( 1N5817 THRU 1N5819 ) 20 10 1N5817 1N5818 1N5819 1.0 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.1 0.1 0.3 O LEAD TEMPERATURE, ( C) 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 400 CT, TOTAL CAPACITANCE, (pF) 100 10 TA = 125 C O TA = 75 OC 1.0 O 0.1 TA = 25 C 0.01 0 20 40 60 80 100 120 TJ = 25 OC 200 100 80 60 40 20 10 140 0.1 0.4 1.0 4 FIG.3 TYPICAL REVERSE CHARACTERISTICS 8.3mS Single Half Sine-Wave JEDEC Method 20 15 10 5 0 2 40 FIG.4 TYPICAL JUNCTION CAPACITANCE 25 1 10 REVERSE VOLTAGE, (V) PERCENT RATED PEAK REVERSE VOLTAGE, (%) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (mA) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 0.001 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 80 Marking Description Cathode Band V Y M Rectron Logo Part No. 1N 5 8 1 X Year – code: (Y:Last digit of year) Month – code: (M:0~9,O,N,D) Voltage-code 7-------20V 8-------30V 9-------40V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE DO-41 -B EA PER BOX INNER BOX SIZE (mm) 1,000 194*75*21 CARTON SIZE EA PER CARTON (mm) 415*220*255 50,000 GROSS WEIGHT(Kg) 16.2 REEL PACK PACKAGE DO-41 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 5,000 5,000 5.0 52 330 355*350*335 20,000 10.49 AMMO PACK COMPONENT TAPE SPACE SPACE(mm) (mm) PACKAGE PACKING CODE REEL ( EA ) DO-41 -F 3,000 5.0 52 DO-41 -E 3,000 5.0 26 BOX SIZE (mm) CARTON SIZE(mm) CARTON ( EA ) GROSS WEIGHT (Kg) 255*73*100 400*268*225 30,000 13.0 256*48*94 42,000 12.41 365*270*217 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.