1SMA5934B

1SMA5913B THRU 1SMA5957B SURFACE MOUNT SILICON ZENER DIODES VZ : 3.3 - 240 Volts PD : 1.5 Watts FEATURES * * * * * * Complete Voltage Range 3.3 to 240 Volts High peak reverse power dissipation High reliability Low leakage current Epoxy : UL94V-O rate flame retardant Mounting position : Any DO-214AC 0.067 (1.70 ) 0.051 (1.29 ) 0.110 ( 2.79 ) 0.086 ( 2.18 ) 0.180 ( 4.57 ) 0.160 ( 4.06 ) 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.091 ( 2.31 ) 0.067 ( 1.70 ) 0.059 ( 1.50 ) 0.035 ( 0.89 ) 0.008 ( 0.203 ) 0.004 ( 0.102 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.209 ( 5.31 ) o Ratings at 25 C ambient temperature unless otherwise specified. 0.185 ( 4.70 ) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA o 25 C unless otherwise noted) RATINGS SYMBOL VALUE UNITS DC Power Dissipation @ TA =25°C PD 1.5 Watts DC Power Dissipation @ TA =60 °C PD 1.25 Watts 20 mW/°C 50 °C/W 4.0 mW/°C R ӨJA 250 °C/W Maximum Forward Voltage at IF = 200 mA VF 1.5 Volts Operating and Storage Temperature Range T J , T STG -65 to + 150 Measured zero lead length(1" square copper pad, FR-4 board) Derate above 75 °C Thermal Resistance Junction to Lead R ӨJL ( FR-4 board) Derate above 25 °C Thermal Resistance Junction to Ambient 0 C 2020-11/08 REV:E 100 IZ, ZENER CURRENT (mA) 1.5 1.25 0.9 TL 0.6 Ta 0.3 10 1 0 0 25 60 80 100 125 150 175 0.1 T, TEMPERATURE (°C) 0 2 4 6 8 VZ, ZENER VOLTAGE (VOLTS) IZ, ZENER CURRENT (mA) 100 10 1 0.1 0 10 20 50 60 30 40 VZ, ZENER VOLTAGE (VOLTS) 70 80 VZ @ I ZT VZ, ZENER VOLTAGE (VOLTS) Fig. 4. Zener Voltage − 3.3 to 12 Volts Fig. 3. VZ = 12 thru 68 Volts IZ, ZENER CURRENT (mA) 10 VZ @ I ZT VZ, ZENER VOLTAGE (VOLTS) Fig. 5. Zener Voltage − 12 to 68 Volts 10 Fig. 2 VZ − 3.3 thru 10 Volts θVZ, TEMPERATURE COEFFICIENT (mV/ °C) Fig. 1 POWER TEMPERATURE DERATING CURVE θVZ, TEMPERATURE COEFFICIENT (mV/ °C) PD, MAXIMUM DISSIPATION, (W) RATING AND CHARACTERISTICS CURVES (1SMA5913B THRU 1SMA5957B) TA = -40 OC TA = 25 OC 1.0 TA = 85 OC TA = 1 25 OC 0.1 0.01 15 16 Fig 6. 17 18 19 20 21 22 23 24 VZ, ZENER VOLTAGE (VOLTS) . 25 o o o Zener Voltage− 20 Volts(-40 oC /25 C/ 85 C /125 C) " " " "" " " RATING AND CHARACTERISTICS CURVES (1SMA5913B THRU 1SMA5957B) 10 Ppk , PEAK POWER (kW) C, CAPACITANCE (pF) 1000 MEASURED @ ZERO BIAS MEASURED @ VZ/2 100 NONREPETITIVE, EXPONENTIAL PULSE WAVEFORM, TJ= 25oC 1 0.1 TJ = 25oC 10  BREAKDOWN VOLTAGE (VOLTS) 0.01 0.01  0.1 1 TP, PULSE WIDTH (ms) Fig. 8. Typical Pulse Rating Curve 120 120 TA = 25oC PW (I ' ) IS DEFINED AS THE POINT WHERE THE PEAK CURRENT PEAK VALUE DECAYS TO 50% OF  Ipp Ippm ≤ 10 s 80 60 HALF VALUEpp - /2 I 40 10/1000 s WAVEFORM AS DEFINED BY R.E.A. 20 0.9 I PEAK 80 WG 0.1 I 0 1 2 3 t, TIME (ms) 4 8/20 s WAVEFORM AS DEFINED BY ANSI C62.1 AND IEC 801-5. 100 Ippm,PEAK PULSE CURRENT (%) 100 PEAK 5 60 0.5 IPEAK 40 20 T=8 s  0 0.02 T 0.04 0.06 t, TIME (ms) 0.08 20 s Fig. 10. Pulse Waveform Fig. 9. Pulse Waveform ZZ, DYNAMIC IMPEDANCE (OHMS) Ippm,PEAK PULSE CURRENT (%) Fig. 7. Capacitance Curve  10 IZ(dc)= 1 mA 10 mA 20 mA IZ(rms)= 0.1 IZ(dc) 10 100 VZ, ZENER VOLTAGE (VOLTS) Fig. 11. Effect of Zener Voltage " " " "" " " 0.1 ELECTRICAL CHARACTERISTICS Ratin at 25 °C ambient tem erature unless otherwise s ecified TYPE Nominal Zener Voltage VZ @ IZT 113.6 ZZT @ IZT (Ω) 10 Maximum Zener Impedance ZZK @ IZK (Ω) 500 104.2 9.0 500 IZT (mA) Max (V) 3.47 Nom (V) 1SMA5913B Min (V) 3.14 3.3 1SMA5914B 3.42 3.78 3.6 1SMA5915B 3.71 4.10 3.9 96.1 7.5 500 1SMA5916B 4.52 4.94 4.3 87.2 6.0 500 1SMA5917B 4.09 4.47 4.7 79.8 5.0 500 1SMA5918B 4.85 5.36 5.1 73.5 4.0 350 5.88 5.6 66.9 2.0 60.5 1SMA5919B 1SMA5920B 5.32 IZK (mA) Maximum Reverse Leakage Current IR @ V R (V) (μA) Maximum DC Zener Current IZM (mA) 1.0 100 1.0 454 1.0 75 1.0 416 1.0 25 1.0 384 1.0 5.0 1.0 348 1.0 5.0 1.5 319 1.0 5.0 2.0 294 250 1.0 5.0 3.0 267 2.0 200 1.0 5.0 4.0 241 1SMA5921B 5.89 6.46 6.51 7.14 6.2 6.8 55.1 2.5 200 1.0 5.0 5.2 220 1SMA5922B 7.13 7.88 7.5 50.0 3.0 400 0.5 5.0 6.0 200 1SMA5923B 7.79 8.61 8.2 45.7 3.5 400 0.5 5.0 6.5 182 1SMA5924B 9.56 10.5 9.1 41.2 4.0 500 0.5 5.0 7.0 164 1SMA5925B 8.65 9.5 10 37.5 4.5 500 0.25 5.0 8.0 150 1SMA5926B 10.45 11.55 11 34.1 5.5 550 0.25 5.0 8.4 136 12.6 13.65 12 31.2 6.5 550 0.25 1.0 9.1 125 1SMA5928B 11.4 12.35 13 28.8 7.0 550 0.25 1.0 9.9 115 1SMA5929B 14.25 15.75 15 25.0 9.0 600 0.25 1.0 11.4 100 16.8 18.9 21.0 16 23.4 10 600 0.25 1.0 12.2 93 18 20.8 12 650 0.25 1.0 13.7 83 20 18.7 14 650 0.25 1.0 15.2 75 17.0 17.5 650 0.25 1.0 16.7 68 1SMA5927B 1SMA5930B 1SMA5931B 1SMA5932B 15.2 17.1 19 1SMA5933B 20.9 23.10 22 1SMA5934B 25.2 28.35 24 15.6 19 700 0.25 1.0 18.2 62 1SMA5935B 22.8 25.65 27 13.9 23 700 0.25 1.0 20.6 55 1SMA5936B 28.5 31.5 30 12.5 26 750 0.25 1.0 22.8 50 1SMA5937B 31.35 34.2 34.65 37.8 33 11.4 33 800 0.25 1.0 25.1 45 36 10.4 38 850 0.25 1.0 27.4 41 1SMA5940B 37.05 40.85 41 45.15 1SMA5938B 1SMA5939B 39 9.6 45 900 0.25 1.0 29.7 38 43 8.7 53 950 0.25 1.0 32.7 34 1SMA5941B 44.65 49.35 47 8.0 67 1000 0.25 1.0 35.8 31 1SMA5942B 48.45 53.55 51 7.3 70 1100 0.25 1.0 38.8 29 1SMA5943B 53.2 58.9 58.8 65.10 1SMA5946B 64.6 71.25 1SMA5947B 77.9 1SMA5948B 86.45 1SMA5944B 1SMA5945B 1SMA5949B 1SMA5950B 1SMA5951B 1SMA5952B 1SMA5953B 56 6.7 86 1300 0.25 1.0 42.6 26 62 6.0 100 1500 0.25 1.0 47.1 24 71.4 78.75 68 5.5 120 1700 0.25 1.0 51.7 22 75 5.0 140 2000 0.25 1.0 56.0 20 86.10 82 4.6 160 2500 0.25 1.0 62.2 18 91 4.1 200 3000 0.25 1.0 69.2 16 95 104.5 105 115.5 100 3.7 250 3100 0.25 1.0 76.0 15 110 3.4 300 4000 0.25 1.0 83.6 13 114 123.5 126 136.5 120 3.1 380 4500 0.25 1.0 91.2 12 130 2.9 450 5000 0.25 1.0 98.8 11 157.5 150 2.5 600 6000 0.25 1.0 114.0 10 2.3 700 6500 0.25 1.0 121.6 9.0 142.5 95.55 1SMA5954B 152 168 160 1SMA5955B 171 190 189 210 180 2.1 900 7000 0.25 1.0 136.8 8.0 200 1.9 1200 8000 0.25 1.0 152.0 7.0 9000 0.25 1.0 182.4 6.0 1SMA5956B 1SMA5957B 240 1.5 1600 228 252 Note : (1) Suffix " B " indicates ± 5% tolerance, suffix " A " indicates ± 10% tolerance. RECTRON Attachment information about 1SMA59xxB 1. Internal Circuit Anode Cathode 2. Marking on the body 1 3 B V X X X Cathode Band Plant - code Year - code (Y: Last digit of year & A:2010,B:2011…..) Part No. Voltage Range 13B-------3.3V : : 57B-------240V Week - code WW:01~52 PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SMA PACKAGE SMA PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W 7,500 15,000 --- --- 330 360*355*360 120,000 15.2 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 2,000 8,000 --- --- 178 390*205*310 64,000 7.8 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.