1SMB5924B

1SMB5913B THRU 1SMB5956B Surface Mount SILICON ZENER DIODES Zener Voltage 3.3 to 200 Volts 3 Watt Power Dissipation FEATURES * * * * * Glass passivated chip Built-in strain relief Low inductance High peak reverse power dissipation Low reverse leakage SMB * For use in stabilizing and clipping with high power rating * ESD Rating of Class 3 (> 20 kV) per Human Body Model 0.086 (2.20) 0.071(1.80) MECHANICAL DATA 0.155 (3.94) 0.130 (3.30) 0.183 (4.65) 0.160 (4.06) * Epoxy: Device has UL flammability classification 94V-O * Lead: Solderable per MIL-STD-750, method 2026 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.081 (2.05) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0.004 (0.102) o Ratings at 25 C ambient temperature unless otherwise specified. 0.220 (5.59) Resistive or inductive load. 0.205 (5.21) Dimensions in inches and (millimeters) Absolute Maximum Ratings (Ta = 25 ) Parameter Power dissipation @ TL = 75 Symbol Rating P 3000 Thermal Resistance, Junction to Lead R Maximum forward voltage at if=200mA Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Square Time Storage temperature and Jumction temperature Unit mW 25 /W VF 1.2 V IFSM 50 A I2T 10.37 A2 S Tstg ,Tj -55 to +150 JL 2020-11/08 REV:E 6 1K PPK , PEAK SURGE POWER (WATTS) P D, MAXIMUM POWER DISSIPATION (WATTS) RATING AND CHARACTERISTICS CURVES (1SMB5913B THRU 1SMB5956B) 5 4 TL 3 2 1 TA 0 0 25 50 75 100 T, TEMPERATURE (qC) 125 RECTANGULAR NONREPETITIVE WAVEFORM TJ=25qC PRIOR TO INITIAL PULSE 500 300 200 100 50 30 20 10 0.1 150 0.2 0.3 0.5 10 8 VZ @ IZT 6 4 2 0 -2 -4 2 4 6 8 VZ, ZENER VOLTAGE (VOLTS) 10 VZ @ IZT 100 70 50 30 20 10 10 12 20 30 50 70 100 VZ, ZENER VOLTAGE (VOLTS) 200 Figure 4. Zener Voltage  14 To 200 Volts 100 100 50 30 20 50 30 20 IZT, REVERSE CURRENT (mA) IZT, REVERSE CURRENT (mA) 100 200 Figure 3. Zener Voltage  To 12 Volts 10 5 3 2 1 0.5 0.3 0.2 0.1 2 3 5 10 20 30 50 PW, PULSE WIDTH (ms) Figure 2. Maximum Surge Power TVZ , TEMPERATURE COEFFICIENT (mV/ qC) TVZ , TEMPERATURE COEFFICIENT (mV/ qC) Figure 1. Steady State Power Derating 1 10 5 3 2 1 0.5 0.3 0.2 0.1 0 1 2 3 4 5 6 7 VZ, ZENER VOLTAGE (VOLTS) 8 Figure 5. VZ = 3.3 thru 10 Volts 9 10 0 10 20 30 40 50 60 70 VZ, ZENER VOLTAGE (VOLTS) 80 Figure 6. VZ = 12 thru 82 Volts 90 100 RATING AND CHARACTERISTICS CURVES (1SMB5913B THRU 1SMB5956B) 200 1k 30 20 10mA 10 7 5 3 2 20mA 5 7 10 TJ = 25qC iZ(rms) = 0.1 IZ(dc) 500 100 70 50 Z Z , DYNAMIC IMPEDANCE (OHMS) Z Z , DYNAMIC IMPEDANCE (OHMS) IZ(dc) = 1mA iZ(rms) = 0.1 IZ(dc) 20 30 50 VZ, ZENER VOLTAGE (VOLTS) 70 200 VZ =150V 100 91V 50 62V 20 10 5 22V 2 12V 1 0.5 100 1 2 Figure 7. Effect of Zener Voltage 5 10 20 50 100 IZ, ZENER TEST CURRENT (mA) 200 6.8V 500 Figure 8. Effect of Zener Current Rating and Typical Characteristic Curves (TA = 25qC) 1000 10 MEASURED @ VZ/2 100 NONREPETITIVE, EXPONENTIAL PULSE WAVEFORM, TJ = 25qC Ppk , PEAK POWER (kW) C, CAPACITANCE (pF) MEASURED @ ZERO BIAS 1 0.1 TJ = 25qC 10 0.01 10 BREAKDOWN VOLTAGE (VOLTS) 100 0.01 Figure 9. Capacitance Curve 10 Figure 10. Typical Pulse Rating Curve 120 120 TA = 25qC PW (ID) IS DEFINED AS THE POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF Ipp. 100 PEAK VALUE Ippm 80 60 0.9 IPEAK HALF VALUE - Ipp/2 40 10/1000 ms WAVEFORM AS DEFINED BY R.E.A. 20 8/20 ms WAVEFORM AS DEFINED BY ANSI C62.1 AND IEC 801-5. 100 CURRENT (%) d 10 ms Ippm, PEAK PULSE Ippm, PEAK PULSE CURRENT (%) 0.1 1 TP, PULSE WIDTH (ms) 80 60 0.5 IPEAK 40 20 td T = 8 ms 0.1 IPEAK 0 0 1 2 3 t, TIME (ms) Figure 11. Pulse Waveform 4 5 0 0 0.02 T 20 ms 0.04 0.06 t, TIME (ms) 0.08 Figure 12. Pulse Waveform 0.1 Part Number Device Marking Code 1RPLQDO=HQHU9ROWDJH#,7 IZT(mA) ( A) VZ AVE.(V)  1SMB5913B 1SMB5914B 1SMB5915B 1SMB5916B 1SMB5917B 1SMB5918B 1SMB5919B 1SMB5920B 1SMB5921B 1SMB5922B 1SMB5923B 1SMB5924B 1SMB5925B 1SMB5926B 1SMB5927B 1SMB5928B 1SMB5929B 1SMB5930B 1SMB5931B 1SMB5932B 1SMB5933B 1SMB5934B 1SMB5935B 1SMB5936B 1SMB5937B 1SMB5938B 1SMB5939B 1SMB5940B 1SMB5941B 1SMB5942B 1SMB5943B 1SMB5944B 1SMB5945B 1SMB5946B 1SMB5947B 1SMB5948B 1SMB5949B 1SMB5950B 1SMB5951B 1SMB5952B 1SMB5953B 1SMB5954B 1SMB5955B 1SMB5956B 0D[LPXP=HQHU,PSHGDQFH VZ MIN.(V) VZ MAX.(V) ZZT MAX.(Ω) @IZT ZZK MAX.(Ω) @IZK IZK(mA) 0D[LPXP5HYHUVH /HDNDJH &XUUHQW /HDNDJH&XUUHQW IR(uA)@V 0D[LPXP '&=HQHU &XUUHQW VR(V) ,=0᧤P$᧥ R 3H0 3H1 3H2 3H3 3H4 3H5 3H6 3A0 3A1 3A2 3A3 3A4 3A5 3A6 3A7 3A8 3B0 3B1 3B3 3B5 3B6 3B7 3B8 3B9 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 0 10.0 11.0 12.0 13.0 15.0 16.0 18.0 20.0 22.0 24.0 27.0 30.0 3.14 3.42 3.71 4.09 4.47 4.85 5.32 5.89 6.46 7.13 7.79 8.65 9 50 9.50 10.45 11.40 12.35 14.25 15.20 17.10 19.00 20.90 22.80 25.65 28.50 3.47 3.78 4.10 4.52 4.94 5.36 5.88 6.51 7.14 7.88 8.61 9.56 10 50 10.50 11.55 12.60 13.65 15.75 16.80 18.90 21.00 23.10 25.20 28.35 31.50 227.3 208.3 192.0 174.0 160.0 147.0 134.0 121.0 110.0 100.0 91.0 82.0 75 0 75.0 68.0 63.0 58.0 50.0 47.0 42.0 37.0 34.0 31.0 28.0 25.0 10.0 9.0 4.5 4.5 4.0 3.5 2.5 1.5 2.0 2.0 2.3 2.5 35 3.5 4.0 4.5 4.5 5.5 5.5 6.0 7.0 8.0 9.0 10.0 16.0 500.0 500.0 400.0 400.0 500.0 550.0 600.0 700.0 700.0 700.0 700.0 700.0 700 0 700.0 700.0 700.0 700.0 700.0 700.0 750.0 750.0 750.0 750.0 750.0 1000.0 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 0.50 0.50 0.50 0 25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 100.0 100.0 100.0 50.0 50.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10 0 10.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 76 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.5 817.0 749.0 691.0 627.0 573.0 528.0 481.0 435.0 393.0 360.0 330.0 297.0 270 0 270.0 225.0 246.0 208.0 180.0 169.0 150.0 135.0 123.0 112.0 100.0 90.0 3C0 3C1 3C2 3C3 3C4 3C5 3C6 3C7 3C8 3C9 3F0 3F1 3F2 3F3 3F4 3F5 3F7 3F8 3G1 3G3 33.0 36.0 39.0 43.0 47.0 51.0 56.0 62.0 68.0 0 75.0 82.0 91.0 100.0 110.0 120.0 130.0 150.0 160.0 180.0 200.0 31.35 34.20 37.05 40.85 44.65 48.45 53.20 58.90 64.60 71.25 77.90 86.45 95.00 104.50 114.00 123.50 142.50 152.00 171.00 190.00 34.65 37.80 40.95 45.15 49.35 53.55 58.80 65.10 71.40 78.75 86.10 95.55 105.00 115.50 126.00 136.50 157.50 168.00 189.00 210.00 23.0 21.0 19.0 17.0 16.0 15.0 13.0 12.0 11.0 10.0 9.1 8.2 7.5 6.8 6.3 5.8 5.0 4.7 4.2 3.7 20.0 22.0 28.0 33.0 38.0 45.0 50.0 55.0 70.0 85.0 95.0 115.0 160.0 225.0 300.0 375.0 550.0 625.0 700.0 875.0 1000.0 1000.0 1000.0 1500.0 1500.0 1500.0 2000.0 2000.0 2000.0 2000.0 3000.0 3000.0 3000.0 4000.0 4500.0 5000.0 6000.0 6500.0 7000.0 8000.0 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 25.1 27.4 29.7 32.7 35.6 38.8 42.6 47.1 51.7 56.0 62.2 69.2 76.0 83.6 91.2 98.8 114.0 121.6 136.8 152.0 82.0 75.0 69.0 63.0 57.0 53.0 48.0 44.0 40.0 36.0 33.0 30.0 27.0 25.0 22.0 21.0 18.0 17.0 15.0 13.0 Marking on the body 3H0 V X Part No. X X Cathode Band Plant - code Year – code (Y: Last digit of year & A:2010,B:2011……) Week – code (WW:01~52) " " " "" " " 1. BOX Packing L W H Code (mm) (mm) (mm) 338 338 40 -W /-T 2. REEL D Packing D Code (mm) -W/-T 330 3. CARTON Packing L W H Code (mm) (mm) (mm) -W/-T 360 355 360 PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SMB PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W/-T 3,000 6,000 --- --- 330 360*355*360 48,000 13.90 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.