2KMD50S

SCHOTTKY BARRIER BRIDGE RECTIFIER 2KMD20S THRU 2KMD60S VOLTAGE RANGE 20 TO 60 Volts CURRENT 2.0 Ampere FEATURES Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability M D-S MECHANICAL DATA Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any 1 2 3 4 M D .035(0.9) .020(0.5) .108(2.74) .092(2.34) .106(2.7) .091(2.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .193(4.9) .177(4.5) .157(4.0) .275(7.0) .004(0.10) MAX. .260(6.6) * * * * .152(3.6) * * * * * * .014(0.35) .006(0.15) Dimensions in inches and (millimeters) MAXIMUM RAT INGS (@ TA=25 OC unless otherwise noted) SYMBOL 2KMD20S 2KMD30S 2KMD40S 2KMD50S 2KMD60S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 Volts Maximum RMS Voltage VRMS 14 21 28 35 42 Volts VDC 20 30 40 50 60 Volts R ATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Lead Te mperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 2.0 Amps I FSM 60 Amps 2 AS 2 Typical Current Squared Time Typical Thermal Resistance (Note 1) IT 14.94 RQJA 50 RθJL 15 0 C/W Typical Junction Capacitance (Note 3) CJ 110 Operating Te mperature Ran g e TJ -55 to + 150 0 C T STG -55 to + 150 0 C Storage Temperature Ran g e pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 2.0 A DC VF o Maximum Average Reverse Current @T A = 25 C at Rated DC Blocking Voltage @T A = 150 o C IR NOTES : 1 . Thermal Resistance : At 9.5mm lead lengths, PCB mounted. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. "ROHS compliant". 2KMD20S 2KMD30S 2KMD40S 2KMD50S 2KMD60S 0.60 0.55 200 10 UNITS Volts uA mA 2019-05 REV:C MINSTANTANEOUS REVERSE CURRENT, (mA) RATING AND CHARACTERISTICS CURVES ( 2KMD20S THRU 2KMD60S ) AVERAGE FORWARD CURRENT, (A) 2.5 2.0 1.5 1.0 Single Phase Half Wave 60Hz Inductive or Resistive Load 0.5 0 0 50 100 100 10 TA = 150 OC TA = 75 OC 1.0 0.1 0.01 150 TA = 25 OC 20 0 LEAD TEMPERATURE, (OC) 60 80 100 120 140 FIG.2 MAXIMUM REVERSE CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 20 CJ, JUNCTION CAPACITANCE, (pF) 400 2 2KMD20S~2KMD40S 2KMD50S~2KMD60S 0.2 TA = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.02 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TJ = 25 OC 200 100 80 60 40 20 10 0.4 0.1 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.0 4 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 1 40 80100 FIG.4 TYPICAL JUNCTION CAPACITANCE 60 0 10 REVERSE VOLTAGE, (V) FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) 40 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 Marking Description Rectron Logo 2K2 Part No. 2-------2A Voltage-code VYWW Year – code (Y:Last digit of year & A:2010,B:2011… ) 2-------20V 3-------30V Week – code (WW:01~52) 4-------40V 5-------50V 6-------60V Mounting Pad Layout .098(2.5) .236(6.0) .072(1.84) .035 (0.9) Dimensions in inches and (millimeters) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX MD-S -T 500 2,000 --- --- 178 390*205*310 16,000 --- MD-S -W 3,000 6,000 --- --- 330 360*355*360 48,000 15.50 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.