2KMD80S

2KMD80S THRU 2KMD200S SCHOTTKY BARRIER BRIDGE RECTIFIER VOLTAGE RANGE 80 TO 200 Volts CURRENT 2.0 Ampere FEATURES Low switching noise Low forward voltage drop High current capability High switching capability High surge capabitity High reliability M D-S MECHANICAL DATA Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.1 3 4 gram 1 2 3 4 M D .035(0.9) .020(0.5) .108(2.74) .092(2.34) .106(2.7) .091(2.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .193(4.9) .177(4.5) .157(4.0) .260(6.6) .004(0.10) MAX. .275(7.0) * * * * * .152(3.6) * * * * * * .014(0.35) .006(0.15) Dimensions in inches and (millimeters) M AX I M U M R AT INGS (@ TA=25 OC unless otherwise noted) SYMBOL 2KMD80S 2KMD100S 2KMD150S 2KMD200S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 80 100 150 200 Volts Maximum RMS Voltage VRMS 56 70 105 140 Volts VDC 80 100 150 200 Volts R ATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Lead Te mperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Thermal Resistance (Note 1) IO 2.0 Amps I FSM 60 Amps 2 IT 14.94 RQJA 50 RθJL 15 2 AS 0 C/W Typical Junction Capacitance (Note 3) CJ 110 pF Operating Te mperature Ran g e TJ 150 0 C T STG -55 to + 150 0 C Storage Te mperature Ra n g e ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 2.0 A DC Maximum Average Reverse Current o @T A = 25 C at Rated DC Blocking Voltage @T A = 100 o C SYMBOL 2KMD80S THRU 2KMD200S UNITS VF 0.85 Volts IR 200 uA NOTES : 1 . Thermal Resistance : At 9.5mm lead lengths, PCB mounted. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 2 mA 2012-02 REV:O MINSTANTANEOUS REVERSE CURRENT, (mA) RATING AND CHARACTERISTICS CURVES ( 2KMD80S THRU 2KMD200S ) AVERAGE FORWARD CURRENT, (A) 2.5 2.0 1.5 1.0 Single Phase Half Wave 60Hz Inductive or Resistive Load 0.5 0 0 50 100 10 TA = 100 OC 1.0 TA = 75 OC TA = 25 OC 0.1 0.01 0.001 150 0 20 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.2 MAXIMUM REVERSE CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE CJ, JUNCTION CAPACITANCE, (pF) 400 2 0.2 TA = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.02 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TJ = 25 OC 200 100 80 60 40 20 10 0.4 0.1 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.0 4 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 1 40 FIG.4 TYPICAL JUNCTION CAPACITANCE 60 0 10 REVERSE VOLTAGE, (V) FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) LEAD TEMPERATURE, (OC) 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 80100 Mounting Pad Layout .276 Max. (7.0 Max.) .105 (2.67) .095 (2.41) .035 Min. (0.90 Min.) Dimensions in inches and (millimeters) .030 Min. (0.76 Min.) Marking Description Rectron Logo 2K8 Part No. 2-------2A Voltage-code VYWW Year – code (Y:Last digit of year & A:2010,B:2011… ) 8-------80V 10-------100V Week – code 15-------150V (WW:01~52) 20-------200V PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX MD-S -T 500 2,000 --- --- 178 390*205*310 16,000 --- MD-S -W 3,000 6,000 --- --- 330 360*355*360 48,000 15.50 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.