2RS104M

2RS101M THRU 2RS107M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * * * * Low leakage Low forward voltage Low cost Mounting position: Any RS-1M MECHANICAL DATA .126 (3.2) .110 (2.8) .578 (14.7) .445（11.3） .036 (0.9) .027 (0.7) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .059 (1.5) .043 (1.1) .059 (1.5) .043 (1.1) .709(18.0) .429 (10.9） .563 (14.3) C .098 (2.5) .669(17.0) * Epoxy: Device has UL flammability classification 94V-O .019 (0.5) .008(0.2) Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .154 (3.9) .154 (3.9) .154 (3.9) .145 (3.7) .145 (3.7) .145 (3.7) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RATINGS 2RS101M 2RS102M 2RS103M 2RS104M 2RS105M 2RS106M 2RS107M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T A = 105 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range Volts IO 2.0 Amps I FSM 60 Amps I2t 14.9 2 A /Sec R θ JC 15 R θ JA 50 T J, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A = 150 C SYMBOL 2RS101M 2RS102M 2RS103M 2RS104M 2RS105M 2RS106M 2RS107M VF 1.1 Volts 2.0 uAmps 2.0 mAmps IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " ROHS compliant". 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. UNITS 2020-04/97 REV:E       Single Phase Half Wave 60 Hz Inductive or Resistive Load       IN STA N TA N EOUS FORWA RD CURREN T, (A ) AVERA GE FO RWA RD CU RREN T, (A ) RATING AND CHARACTERISTICS CURVES ( 2RS101M THRU 2RS107M )     2 7 $ = 25 & Pulse Width = 300 M6  Duty Cycle  2 AMBIENT TEMPERATURE, ( & O C PEA K FORWA RD SURGE CURREN T, (A ) IN STA N TA N EOUS REVERSE CURREN T, (u A)       TA =150 1000 10 O TA = 25 C 1.0 0.1  FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 10000  INSTANTANEOUS FORWARD VOLTAGE, (V)         8.3mS Single Half Sine-Wave JEDEC Method              PERCENT RATED PEAK REVERSE VOLTAGE, (%) NUMBER OF CYCLES AT 60Hz FIG.3 MAXIMUM REVERSE CHARACTERISTICS FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Marking Description Rectron Logo Year – code: (Y:Last digit of year& A:2010, B:2011……) 2RS10XM Voltage-code V Y WW Week – code: (WW:01~52) ~ ~ Part No. 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) RS-1M -C 1,700 540*118*118 560*259*144 EA PER CARTON WEIGHT(Kg) 3,400 15.25 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.