4RS203M

4RS201M THRU 4RS 207M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes FEATURES Low leakage Low forward voltage Low cost Mounting position: Any RS-2M ( 10.5 ) ( 2.3 ) ( 18.8 ) ( 12.7 ) . .035 (0.9) ( 2.7 ) .079 .047 (1.2 ) .047 ( 2.0 ) ( 1.2 ) .047 (1.2) .091 .740 .098 (2.5 ) .106 * Epoxy: Device has UL flammability classification 94V-O ( 11.5 ) .130 (3.3 ) .413 .146 (3.7 ) .768 (19.5 ) .453 MECHANICAL DATA .811 (20.6 ) .500 * * * * .047 (1.2 ) .031 (0.8 ) .024 (0.6 ) .015 (0.38) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .209 (5.3 ) .209 (5.3 ) .209 (5.3 ) .189 (4.8 ) .189 (4.8 ) .189 (4.8 ) *Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RATINGS 4RS201M 4RS202M 4RS203M 4RS204M 4RS205M 4RS206M 4RS207M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T A = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range Volts IO 4.0 Amps I FSM 120 Amps 2 I t 60 2 A /Sec R1JC 6.0 R1JA 26 T J, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O CHARACTERISTICS Maximum Instantaneous Forward Voltage at 4.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A = 150 C SYMBOL 4RS201M 4RS202M 4RS203M 4RS204M 4RS205M 4RS206M 4RS207M VF 1.1 Volts 2.0 MAmps IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " ROHS compliant". 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. 5.0 UNITS mAmps 2021-07/111 REV:C AVERAGE FORWARD CURRENT, (A) 5.0 4.0 3.0 2.0 Single Phase Half Wave 60 Hz Inductive or Resistive Load 1.0 0 0 50 100 150 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( 4RS201M THRU 4RS207M ) 40 10 4 1.0 0.4 T A = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 O AMBIENT TEMPERATURE, ( C) INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 100000 TA =150 10000 O C 1000 10 O TA = 25 C 1.0 0 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 150 8.3mS Single Half Sine-Wave JEDEC Method 125 100 75 50 25 0 1 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM NON-REPET TITIVE FORWARD SURGE CURRENT Marking Description Rectron Logo 4RS20XM Part No. Voltage-code V Y WW Year – code: (Y: Last digit of year& A:2010, B:2011……) Week – code: (WW:01~52) 7---for all Voltage range PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) RS-2M -C 1,000 448*158*65 465*335*155 EA PER CARTON WEIGHT(Kg) 4,000 15.00 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.