BAV20W

RECTRON ECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION BAV20W SMALL SIGNAL DIODE VOLTAGE RANGE 150 Volts CURRENT 200 mAmpere FEATURES * Fast Switching Speed * Surface Mount Package ldeally Suited for Automatic Insertion * General Purpose Switching Applications SOD-123 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.01 gram .110(2.80) .102(2.60) .067(1.70) .059(1.50) .026(.65) .018(.45) .152(3.85) .140(3.55) .006(.15) .003(.08) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .049(1.25) .041(1.05) .004(.10) .000(.00) REF .020(0.50) D imensions in inches and (millimeters) MAXIMUM RAT INGS (@ TA=25 OC unless otherwise noted) RATINGS Non-Repetitive Peak Reverse Voltage Maximum Repetitive Peak Reverse Voltage Maximum Working Peak reverse Voltage Maximum DC Blocking Voltage Maximum RMS Voltage M aximum Forward Comtinuous Current Maximum Average Forward Rectified Current Non-Repetitive Peak Forward Surge Current @t=1.0mS @t=1.0S SYMBOL VRM V RRM V RWM VR VRMS IFM IO IFSM T rr CT PD RΘJA TJ,TSTG BAV20W 200 150 106 400 200 2.5 0.5 UNITS Volts Volts Volts mAmps mAmps Amps nS pF mW O Typical Reverse Recovery Time(I F=I R=30mA,I rr =0.1X IR,R L=100 Ω ) Typical Junction Capacitance(V R=0V,f=1MHz) M aximum Power Dissipation Typical Thermal Resistance Operating and Storage Temperature Range 50 5 250 500 -65 to + 150 C/W O C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) SYMBOL CHARACTERISTICS @I F =0.1A BAV20W 1.0 1.25 0.1 UNITS Volts uAmps Maximum Instantaneous Forward Voltage Maximum Instantaneous Reverse Current @I F =0.2A @V R =150V VF IR 2006-3 RATING AND CHARACTERISTICS CURVES ( BAV20W ) IF, INSTANTANEOUS FORWARD CURRENT(A) 300 PD, POWER DISSIPATION (mW) 250 200 150 100 50 0 0 25 50 75 100 O 1 0.1 TA=-40 C TA= 0 C O O 0.01 TA=25 C TA=75 C TA=150 C O O O TA=125 C O 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE(V) 125 150 TA, AMBIENT TEMPERATURE( C) Figure1 Power Derating Curve IR,INSTANTANEOUS REVERSE CURRENT(µA) 100 TA=150 C O Figure2 Typical Foward Characteristics 4.0 10 1 0.1 0.01 0.001 0.0001 0 50 TA=125 C TA=75 C O O CT,TOTAL CAPACITANCE(pF) O 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 f=1.0MHz TA=25 C TA= 0 C O O TA=-40 C 100 150 200 250 0 10 20 VR, REVERSE VOLTAGE(V) 30 40 VR,INSTANTANEOUS REVERSE VOLTAGE(V) Figure3 Typical Reverse Characteristics Figure4 Typical Capacitance vs Reverse Voltage R ECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. R ECTRON