BR605

BR605 THRU BR610 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Amperes FEATURES * Surge overload rating :175 amperes peak * Low forward voltage drop * Small size :simple installation * Mounting position: Any * Mounting: Hole thru for #6 screw * Mounting Torque : 8 KgF/cm(max.) BR-6 * Recommended Torque : 6 KgF/cm .270 (6.8) MECHANICAL DATA .230 (5.8) * Epoxy: Device has UL flammability classification 94V-O * UL list the recognized component directory,file #E94233 .945 (24.0) MIN. .042 (1.07) .750 .038 (0.97) DIA. (19.1) MIN. (+ ) .620 (15.7) .158 (4.0) .154 (3.9) .580 (14.7) .445 (11.3) .405 (10.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. AC resistive or inductive load. .445 (11.3) .620 (15.7) .405 (10.3) .580 (14.7) AC Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL BR605 BR61 BR62 BR64 BR66 BR68 BR610 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T C = 75 C (with heat sink) Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Current Squarad Time Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range UNITS Volts IO 6.0 Amps I FSM 175 Amps 2 I t 127 A /Sec R θ JC 7.3 R θ JA 25 T J, T STG -55 to + 150 2 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A = 150 C BR605 VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " Ro HS c ompliant" 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. BR61 BR62 BR64 BR66 BR68 BR610 UNITS 1.1 Volts 5.0 uAmps 10 mAmps 2021-11 REV: G AVERAGE FORWARD CURRENT, (A) 6.0 4.8 3.6 2.4 Single Phase Half Wave 60 Hz Inductive or Resistive Load 1.2 0 0 50 100 150 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( BR605 THRU BR610 ) 40 10 4 1 0.4 0.1 T A = 25 OC Pulse Width = 300mS 1% Duty Cycle 0 100000 1.5 2.0 2.5 3.0 FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TA = 150 O C 100 10 TA = 25 OC 0 1.0 INSTANTANEOUS FORWARD VOLTAGE, (V) 10000 1.0 0.5 CASE TEMPERATURE, ( C) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) O 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 180 3.5 8.3mS Single Half Sine-Wave JEDEC Method 150 120 90 60 30 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Marking Description Rectron Logo UL Logo Year – code (Y:Last digit of year) BR6 VYWW Week-code (WW:01~52) Part No. PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE BR-3/-6 -B EA PER BOX 200 INNER BOX SIZE CARTON SIZE (mm) (mm) 206*208*55 450*220*255 EA PER CARTON 2,000 GROSS WEIGHT(Kg) 7.50/8.50 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.