BSAC5.0

BSAC5.0 LOW CAPACITANCE TRANSZORB Transient Voltage Suppressors FEATURES * Plastic package has underwriters l aboratory * Glass p assivated c hi p c onstruction * 500 w atts peak pulse power capability with a 10/1000us waveform,repetition rate (duty cycle):0.01% * Excellent clamping cap a bility * Low incremental surge resistance * Very f ast r esponse t ime * Ideal for data line applications * High temperature soldering guaranteed: 265 o C /10 seconds,0.375”(9.5mm) lead length, 5lbs.(2.3kg) tension * Case: JEDEC DO-204AC molded plastic body over passivated junction * Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 * Polarity: Color band denotes TVS cathode * Mounting position: Any * Weight: 0.098 grams DO-214AA 0.083 (2.11) 0.077 (1.96) 0.155 (3.94) 0.130 (3.30) MECHANICAL DATA 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0.004 (0.102) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. o 0.220 (5.59) 0.205 (5.21) Dimensions in inches and (millimeters) Schematic Diode T ransient V oltage Suppressor MAXIMUM RATINGS AND THERMAL CHARACTERISTICS (@ TA=25 OC unless otherwise noted) R ATINGS Peak Pulse Power Dissipation With a 10/1000uS Waveform (Note 1) Steady State Power Dissipation at T L =75 OC Lead Lengths .375" (9.5mm) (Note 2) Peak Pulse Forward Surge Current With a 10/1000uS Waveform (Fig.3) Operating Te mperature Ran g e Storage Temperature R an g e NOTES : 1 . Non-repetitive current pulse, per Fig.3 and derated above T A = 25 OC per Fig.2 2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. SYMBOL PPPM PM(AV) IFSM TJ T STG BSAC5.0 Min. 500 5.0 100 150 -55 to + 150 UNITS Watts Watts Amps 0 0 C C 2007-3 ( BSAC5.0 ) ELECTRICAL CHARACTERISTICS Rectron House No. Reverse Stand off Voltage VWM * (Volts) 5.0 Minimum Breakdown voltage at IT=1.0mA V(BR) (V) 7.60 Maximum Reverse Leakage at VWM at ID (uA) 300 Maximum Clamping Voltage IPPM=5.0A VC (Volts) 10.0 Maximum Working Maximum Junction Inverse Peak Pulse Capacitance Blocking Current at Voltage IPPM 0 Volts VWB (Amps) (PF) (V) 44 50 75 Inverse Blocking Leakage Current VWB IIB(mA) 1.0 Peak Inverse Blocking Voltage VPIB (V) 100 BSAC5.0 * Non -repetitive current pulse,per Fig.3 and derated above TA=25 degree per Fig.2 Mounting Pad Layout 0.106 MAX. (2.69 MAX.) 0.083MIN. ( 2.10 MIN.) 0.050 MAX. (1.27 MAX.) 0.220 (5.58) REF Dimensions in inches and (millimeters) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.