BZT52B27S

BZT52BxxSV Series SOD-323 Plastic-Encapsulate Zener Diode FEATURES * * * * * Low Zener Impedance Power Dissipation of 500mW High Stability and High Reliability P/N suffix V means AEC-Q101 qualified, eg:BZT52B10SV P/N suffix V means Halogen-free SOD-323 MECHANICAL DATA * SOD-323 Small Outline Plastic Package * Polarity: Color band denotes cathode end * Mounting Position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Maximum Ratings & Thermal Characteristics (Ratings at 25 ambient temperature unless otherwise specified.) Parameters Symbol Value Unit Power Dissipation Pd 500 1) mW Forward Voltage @IF=10mA Vf 0.9 2) V Storage temperature range Ts -65~ +150 1) 2) 3) Device mounted on ceramic PCB: 7.6mm x 9.4mm x 0.87mm with pad areas 25mm² Short duration test pulse used to minimize self-heating effect f=1KHz 2018-04/ 24 REV:A Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified). Zener Voltage Range Maximum Zener Impedance Zzk Zzt Izk @Izt @Izk mA Maximum Reverse Current Typical Temperature coefficent @ IZTC=mV/ Min Max Test Current IZTC Device Marking Nom(V) Min(V) Max(V) mA uA V BZT52B2V4S 2WX 2.4 2.35 2.45 5 100 600 1.0 50 1.0 -3.5 0 5 BZT52B2V7S 2W1 2.7 2.65 2.75 5 100 600 1.0 20 1.0 -3.5 0 5 BZT52B3V0S 2W2 3.0 2.94 3.06 5 95 600 1.0 10 1.0 -3.5 0 5 BZT52B3V3S 2W3 3.3 3.23 3.37 5 95 600 1.0 5 1.0 -3.5 0 5 BZT52B3V6S 2W4 3.6 3.53 3.67 5 90 600 1.0 5 1.0 -3.5 0 5 BZT52B3V9S 2W5 3.9 3.82 3.98 5 90 600 1.0 3 1.0 -3.5 0 5 BZT52B4V3S 2W6 4.3 4.21 4.39 5 90 600 1.0 3 1.0 -3.5 0 5 Vz@Izt Izt IR VR mA BZT52B4V7S 2W7 4.7 4.61 4.79 5 80 500 1.0 3 2.0 -3.5 0.2 5 BZT52B5V1S 2W8 5.1 5.00 5.20 5 60 480 1.0 2 2.0 -2.7 1.2 5 BZT52B5V6S 2W9 5.6 5.49 5.71 5 40 400 1.0 1 2.0 -2.0 2.5 5 BZT52B6V2S 2WA 6.2 6.08 6.32 5 10 150 1.0 3 4.0 0.4 3.7 5 BZT52B6V8S 2WB 6.8 6.66 6.94 5 15 80 1.0 2 4.0 1.2 4.5 5 BZT52B7V5S 2WC 7.5 7.35 7.65 5 15 80 1.0 1 5.0 2.5 5.3 5 BZT52B8V2S 2WD 8.2 8.04 8.36 5 15 80 1.0 0.7 5.0 3.2 6.2 5 BZT52B9V1S 2WE 9.1 8.92 9.28 5 15 100 1.0 0.5 6.0 3.8 7.0 5 BZT52B10S 2WF 10 9.80 10.20 5 20 150 1.0 0.2 7.0 4.5 8.0 5 BZT52B11S 2WG 11 10.78 11.22 5 20 150 1.0 0.1 8.0 5.4 9.0 5 BZT52B12S 2WH 12 11.76 12.24 5 25 150 1.0 0.1 8.0 6.0 10.0 5 BZT52B13S 2WI 13 12.74 13.26 5 30 170 1.0 0.1 8.0 7.0 11.0 5 BZT52B15S 2WJ 15 14.70 15.30 5 30 200 1.0 0.1 10.5 9.2 13.0 5 BZT52B16S 2WK 16 15.68 16.32 5 40 200 1.0 0.1 11.2 10.4 14.0 5 BZT52B18S 2WL 18 17.64 18.36 5 45 225 1.0 0.1 12.6 12.4 16.0 5 BZT52B20S 2WM 20 19.60 20.40 5 55 225 1.0 0.1 14.0 14.4 18.0 5 BZT52B22S 2WN 22 21.56 22.44 5 55 250 1.0 0.1 15.4 16.4 20.0 5 BZT52B24S 2WO 24 23.52 24.48 5 70 250 1.0 0.1 16.8 18.4 22.0 5 BZT52B27S 2WP 27 26.46 27.54 2 80 300 0.5 0.1 18.9 21.4 25.3 2 BZT52B30S 2WQ 30 29.40 30.60 2 80 300 0.5 0.1 21.0 24.4 29.4 2 BZT52B33S 2WR 33 32.34 33.66 2 80 325 0.5 0.1 23.1 27.4 33.4 2 BZT52B36S 2WS 36 35.28 36.72 2 90 350 0.5 0.1 25.2 30.4 37.4 2 BZT52B39S 2WT 39 38.22 39.78 2 130 350 0.5 0.1 27.3 33.4 41.2 2 BZT52B43S 2WU 43 41.16 43.84 2 100 700 1.0 0.1 32.0 10.0 12.0 5 RATING AND CHARACTERISTICS CURVES (BZT52B2V4SV THRU BZT52B43SV) Forward characteristics Admissible power dissipation versus ambient temperature RATING AND CHARACTERISTICS CURVES (BZT52B2V4SV THRU BZT52B43SV) Pulse thermal resistance versus pulse duration Dynamic resistance versus Zener current Capacitance versus Zener voltage Dynamic resistance versus Zener current Dynamic resistance versus Zener current Thermal differential resistance versus Zener voltage " " " "" " " RATING AND CHARACTERISTICS CURVES (BZT52B2V4SV THRU BZT52B43SV) Dynamic resistance versus Zener voltage Temperature dependence of Zener voltage versus Zener voltage Temperature dependence of Zener voltage versus Zener voltage Change of Zener voltage versus junction temperature Change of Zener voltage versus junction temperature Change of Zener voltge from turn-on up to the point of thermal equilibrium versus Zener voltage " " " "" " " SOD-323 PACKAGE OUTLINE Plastic surface mounted package Symbol SOD-323 Min.(mm) Max.(mm) 1.000 A A1 0.000 0.100 A2 0.800 0.900 b 0.250 0.350 c 0.080 0.150 D 1.200 1.400 E 1.600 1.800 E1 2.500 2.700 0.475REF L L1 0.400 0.250 REEL PACK PACKAGE SOD-323 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 3,000 15,000 --- --- 178 390*205*31 120,000 5.17 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.