BZT52B5V1S

SEMICONDUCTOR TECHNICAL SPECIFICATION R ECTRON BZT52B4V3SBZT52B39S SURFACE MOUNT ZENER DIODE VOLTAGE RANGE 3 to 39 Volts POWER RATING 410 mWatts FEATURES * Planar Die Constrruction * Ultra-Small Surface Mount Package * Ideally Suited for Automated Assembly Processes SOD-323 F MECHANICAL DA TA * * * * * .016(.40) .010(.25) Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.004 gram .071(1.80) .063(1.60) .053(1.35) .045(1.15) .110(2.80) .091(2.30) .006(0.15) .002(0.05) MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .043(1.10) .031(0.80) Dimensions in inches and (millimeters) MAXIMUM RATINGES ( @ TA = 25 C unless otherwise noted ) RATINGS Peak Forward Surge Current (1) Max. Steady State Power Dissipation @TA=25oC (2) Max. Operating Temperature Range Storage Temperature Range Max. Instantaneous Forward Voltage at IF= 10mA SYMBOL IFSM PD TJ TSTG VF VALUE 2.0 410 -55 to +150 -55 to +150 0.9 UNITS Amds mW o o o C C Volts 2006-3 NOTES : 1. Measured on 8.3ms,single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. 2. Mounted on 5.0mm2(0.13mm thick) land areas. ELECTRICAL CHARACTERISTICS Zener voltage TYPE Min BZT52B 4V3S BZT52B 4V7S BZT52B 5V1S BZT52B 5V6S BZT52B 6V2S BZT52B 6V8S BZT52B 7V5S BZT52B 8V2S BZT52B 9V1S BZT52B 10S BZT52B 11S BZT52B 12S BZT52B 13S BZT52B 14S BZT52B 15S BZT52B 16S BZT52B 17S BZT52B 18S BZT52B 20S BZT52B 22S BZT52B 24S BZT52B 27S BZT52B 28S BZT52B 30S BZT52B 33S BZT52B 36S BZT52B 39S 4.21 4.61 5.00 5.49 6.08 6.66 7.35 8.04 8.92 9.80 10.78 11.76 12.74 13.72 14.70 15.68 16.66 17.64 19.60 21.56 23.52 26.46 27.44 29.40 32.34 35.28 38.22 VZ @ IZT Volts Max 4.39 4.79 5.20 5.71 6.32 6.94 7.65 8.36 9.28 10.20 11.22 12.24 13.26 14.28 15.30 16.32 17.34 18.36 20.40 22.44 24.48 27.54 28.56 30.60 33.66 36.72 39.78 (@TA=25 C unless otherwise specified) Maximum Zener impedance Reverse Leakage Current IR@ (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 (uA) Max 5.0 5.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1.0 2.0 0.8 1.0 2.0 3.0 5.0 6.0 7.0 7.5 8.5 9.0 10 10.5 11 12 13 14 15 17 18 20 22 22.5 25 27 29 VR (V) O ZZT @ IZT (Ω) Max 95 78 60 40 10 8 7 7 10 15 20 20 25 25 30 40 40 50 50 55 80 80 80 80 80 80 80 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 (mA) (Ω) Max 500 500 480 400 200 150 50 50 50 70 70 90 110 110 110 170 170 170 220 220 220 250 250 250 250 250 300 ZZK @ IZK R ECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. R ECTRON