BZT52C11

BZT52C2V4 THRU BZT52C75 Low Zener Impedance Power Dissipation of 500mW High Stability and High Reliability SOD-123 Small Outline Plastic Package Polarity: Color band denotes cathode end Epoxy UL: 94V-0 Mounting Position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, resistive or inductive load. (Ratings at 25 ambient temperature unless otherwise specified.) Parameters 1) 2) 3) Symbol Value Unit Power Dissipation Pd 500 mW Forward Voltage @IF=10mA Vf 0.9 V Storage temperature range Ts,Tj -65-+150 Device mounted on ceramic PCB: 7.6mm x 9.4mm x 0.87mm with pad areas 25mm Short duration test pulse used to minimize self-heating effect f=1KHz 2020-11/08 REV:C Zener voltage Range Vz(V)@Izt TYPE BZT52C2V4 BZT52C2V7 BZT52C3V0 BZT52C3V3 BZT52C3V6 BZT52C3V9 BZT52C4V3 BZT52C4V7 BZT52C5V1 BZT52C5V6 BZT52C6V2 BZT52C6V8 BZT52C7V5 BZT52C8V2 BZT52C9V1 BZT52C10 BZT52C11 BZT52C12 BZT52C13 BZT52C14 BZT52C15 BZT52C16 BZT52C18 BZT52C20 BZT52C22 BZT52C24 BZT52C27 BZT52C30 BZT52C33 BZT52C36 BZT52C39 BZT52C43 BZT52C47 BZT52C51 BZT52C56 BZT52C62 BZT52C68 BZT52C75 Test current Maximum Zener impedance Maximum Reverse leakage current MARKING Nom Min Max (Volts) Izt(mA) 2.4 (Volts) 2.28 (Volts) WX 2.52 5 W1 2.7 2.57 2.84 5 W2 3 5 3.3 3.47 5 W4 3.6 3.78 5 W5 3.9 4.1 5 W6 4.3 4.52 5 W7 4.7 4.94 5 W8 5.1 5.36 5 W9 5.6 5.88 5 WA 6.2 6.51 5 WB 6.8 7.14 5 WC 7.5 7.88 5 WD 8.2 8.61 5 WE 9.1 9.56 5 WF 10 WG 11 WH 12 WI 13 WY 14 2.85 3.14 3.42 3.71 4.09 4.47 4.85 5.32 5.89 6.46 7.13 7.79 8.65 9.5 10.45 11.4 12.35 13.3 14.25 15.2 17.1 19 20.9 22.8 25.65 28.5 31.35 34.2 37.05 40.85 44.65 48.45 53.2 58.9 64.6 71.25 3.15 W3 WJ 15 WK 16 WL 18 WM 20 WN 22 WO 24 WP 27 WQ 30 WR 33 WS 36 WT 39 WU 43 WV 47 X1 X2 51 56 X3 X4 62 68 X5 75 10.5 5 11.55 5 12.6 5 13.65 5 14.7 5 15.75 5 16.8 5 18.9 5 21 5 23.1 5 25.2 5 28.35 2 31.5 2 34.65 2 37.8 2 40.95 2 45.15 2 59.35 2 53.55 58.8 2 2 65.1 71.4 2 2 78.75 2 ZZT ZZK IZK IR VR (¡ ) 100 100 95 95 90 90 90 80 60 40 10 15 15 15 15 20 20 25 30 25 30 40 45 55 55 70 80 80 80 90 130 150 170 180 200 225 240 265 (¡ ) (mA) 1 600 1 600 1 600 1 600 1 600 1 600 1 500 1 480 1 400 1 150 1 80 1 80 1 (uA) 50 20 10 5 5 3 3 3 2 1 3 2 1 0.7 0.5 0.2 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 (Volts) 600 80 1 100 1 150 1 150 1 150 1 170 1 110 1 200 1 200 1 225 1 225 1 250 1 250 1 300 0.5 300 0.5 325 0.5 350 0.5 350 0.5 375 0.5 1000 0.25 1300 1400 0.25 0.25 1400 1600 0.25 0.25 1700 0.25 1 1 1 1 1 1 1 2 2 2 4 4 5 5 6 7 8 8 8 10.5 10.5 11.2 12.6 14 15.4 16.8 18.9 21 23.1 25.2 27.3 30.1 36 39 43 47 52 56 RATING AND CHARACTERISTICS CURVES (BZT52C2V4 THRU BZT52C75) RATING AND CHARACTERISTICS CURVES (BZT52C2V4 THRU BZT52C75) Precautions: PCB Design Recommended land dimensions for SOD-123 diode. Electrode patterns for PCBs ±0.05 ±0.05 ±0.05 Unit: mm " " " "" " " DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.