BZX84C22W

BZX84C2V4WBZX84C39W SURFACE MOUNT ZENER DIODE VOLTAGE RANGE 2.4 to 39Volts POWER RATING 200 mWatts FEATURES * Power dissipation O P D : 200 mW (Tamb=25 C) * Zener Voltages * Operating and storage junction temperature range O O T J ,Tstg: -55 C to+150 C SOT-323 * * * * * MECHANICAL DATA Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.006 gram 0.053(1.35) 0.045(1.15) 0.006(0.15) 0.003(0.08) REF 0.021(0.53) 0.043(1.10) 0.035(0.90) 0.004(0.10) 0.000(0.00) 0.016(0.40) 0.008(0.20) 0.096(2.45) 0.085(2.15) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 0.055(1.40) 0.047(1.20) 0.087(2.20) 0.079(2.00) Dimensions in inches and (millimeters) MAXIMUM RATINGES ( @ TA = 25 C unless otherwise noted ) RATINGS Max. Steady State Power Dissipation Max. Operating Temperature Range Storage Temperature Range @TA=25oC SYMBOL PD TJ TSTG VALUE 200 150 -65 to +150 UNITS mW o o o C C ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted ) CHARACTERISTICS Thermal Resistance Junction to Ambient Max. Instantaneous Forward Voltage at IF= 10mA SYMBOL R qJA VF MIN. TYP. MAX. 625 0.9 UNITS o C/W Volts 2006-3 ELECTRICAL CHARACTERISTICS Zener voltage Range (Note 1) TYPE Nom(V) VZ (V) @ IZT Min(V) 2.2 2.7 2.8 3.1 3.4 3.7 4.0 4.4 4.8 5.2 5.8 6.4 7.0 7.7 8.5 9.4 10.4 11.4 12.4 13.8 15.3 16.8 18.8 20.8 22.8 25.1 28.0 31.0 34.0 37.0 Max(V) 2.6 2.9 3.2 3.5 3.8 4.1 4.6 5.0 5.4 6.0 6.6 7.2 7.9 8.7 9.6 10.6 11.6 12.7 14.1 15.6 17.1 19.1 21.2 23.3 25.6 28.9 32 35 38 41 IZT (mA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.0 2.0 2.0 2.0 2.0 (@TA=25 C unless otherwise specified) O Maximum Zener impedance (Note 2) ZZT at IZT (W) 100 100 95 95 90 90 90 80 60 40 10 15 15 15 15 20 20 25 30 30 40 45 55 55 70 80 80 80 90 130 ZZK (W) 600 600 600 600 600 600 600 600 500 480 400 150 80 80 80 100 150 150 150 170 200 200 225 225 250 250 300 300 325 350 at IZK (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 Maximum Reverse current IR (uA) 50 20 20 5.0 5.0 3.0 3.0 3.0 2.0 1.0 3.0 2.0 1.0 0.7 0.5 0.2 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 at VR (V) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 4.0 4.0 5.0 5.0 6.0 7.0 8.0 8.0 8.0 10.5 11.2 12.6 14.0 15.4 16.8 18.9 21.0 23.1 25.2 27.3 Temperature Coetficient of Zener Voltage @ IZT=5mA(mV/ C) O Min -3.5 -3.5 -3.5 -3.5 -3.5 -3.5 -3.5 -3.5 -2.7 -2.0 0.4 1.2 2.5 3.2 3.8 4.5 5.4 6.0 7.0 9.2 10.4 12.4 14.4 16.4 18.4 21.4 24.4 27.4 30.4 33.4 Max 0 0 0 0 0 0 0 0.2 1.2 2.5 3.7 4.5 5.3 6.2 7.0 8.0 9.0 10.0 11.0 13.0 14.0 16.0 18.0 20.0 22.0 25.3 29.4 33.4 37.4 41.2 BZX84C2V4W BZX84C2V7W BZX84C3V0W BZX84C3V3W BZX84C3V6W BZX84C3V9W BZX84C4V3W BZX84C4V7W BZX84C5V1W BZX84C5V6W BZX84C6V2W BZX84C6V8W BZX84C7V5W BZX84C8V2W BZX84C9V1W BZX84C10W BZX84C11W BZX84C12W BZX84C13W BZX84C15W BZX84C16W BZX84C18W BZX84C20W BZX84C22W BZX84C24W BZX84C27W BZX84C30W BZX84C33W BZX84C36W BZX84C39W 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 Notes 1. Tested with pulses,300ms pulse width, 2% duty cycle. 2. f = 1KHz. R ECTRON RATING AND CHARACTERISTICS CURVES ( BZX84C2V4W-BZX84C39W ) 300 PD, POWER DISSIPATION (mW) 50 TJ=25 OC C2V7 C3V9 C5V6 C6V8 C8V2 200 IZ, ZENER CURRENT(mA) 40 30 20 10 0 Test Current Iz 5.0mA C3V3 C4V7 100 0 0 100 TA, AMBIENT TEMPERATURE( C) O 200 0 1 2 3 4 5 6 7 8 9 10 VZ, ZENER VOLTAGE(V) Figure1 Power Dissipation Curve 30 IZ, ZENER CURRENT (mA) TJ=25OC C10 Figure2 Zener Breakdown Characteristios 1000 CT,TOTAL CAPACITANCE(pF) VR=1V VR=2V TJ=25 OC C12 20 C15 C18 100 VR=1V 10 Test Current Iz 5mA C22 C27 C33 C36 C39 VR=2V 0 0 10 20 VZ, ZENER VOLTAGE(V) 30 40 1 0 10 VZ,NOMINAL ZENER VOLTAGE(V) 100 Figure3 Zener Breakdown Characteristics Figure4 Total Capacitance vs Nominal Zener Voltage R ECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. R ECTRON