CMBT9014

CMBT9014 NPN SILICON PLANAR TRANSISTOR FEATURES * Power dissipation PC : 0.25 W (Tamb=25OC) * Collector current IC : 0.1 A * Collector-base voltage VCBO : 30 V * Operating and storage junction temperature range TJ,Tstg: -55OC to +150OC SOT-23 COLLECTOR 3 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.008 gram BASE 1 EMITTER 0.006(0.15) 0.003(0.08) 2 0.055(1.40) 0.047(1.20) 0.043(1.10) 0.035(0.90) 0.026(0.67) 0.022(0.57) 0.004(0.10) 0.000(0.00) 0.020(0.50) 0.012(0.30) 0.102(2.60) 0.095(2.40) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase , half wave, 60H Z , resistive or inductive load. For capacitive load, derate current by 20%. O 0.019(2.00) 0.071(1.80) 1 3 0.110(2.80) 2 0.118(3.00) Dimensions in inches and (millimeters) ABSOLUTE MAXIMUM RATINGS DESCRIPTION Collector-base Voltage Collector-emitter Voltage Emitter-base Voltage Collector Current Collector Dissipation Operation And Storage Junction SYMBOL VCBO VCEO VEBO IC PC TJ, TSTG VALUE 30 30 5.0 100 250 -55 to +150 UNITS V V V mA mW O C ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted ) CHARACTERISTICS Collector-base Voltage (IC= 100mA, IE=0) Collector-emitter Voltage (IC= 1mA, IB=0) Emitter-base Voltage (IE= 100mA, IC=0) Collector Cut-off Current (VCB= 30V, IE=0) Emitter Cut-off Current (VEB= 5V, IC= 0) DC Current Gain (IC= 1mA, VCE= 5V) Collector-emitter Saturation Voltage (IC= 100mA, IB= 5mA) Base-emitter Voltage ((IC= 100mA, IB= 5mA) Transition Frequency (VCE= 5V, IC= -10mA, f=100MHZ) Output Capacitance ((VCB= 10V, f= 1MHz) Noise Figure (VCE= 5V, IC= 200uA, f=1KHZ) CLASSIFICATION hFE Marking Note 1: "Fully ROHS compliant", "100% Sn plating (Pb-free)". SYMBOL VCBO VCEO VEBO ICBO IEBO hFE VCE(sat) VBE(sat) fT Cob NF CMBT9014 150-1000 14 MIN 30 30 5.0 150 125 B 100-300 14B TYP C 200-600 14C MAX 15 500 1000 0.60 1.2 3.5 4.0 D 400-1000 14D VD 2008-02 UNITS V V V nA nA V V MHZ pF dB DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.