EFM102-W

EFM101 THRU EFM107 SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIER VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere FEATURES * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction DO-214AC MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 * Mounting position: Any * Weight: 0.057 gram 0.067 (1.70 ) 0.110 ( 2.79 ) 0.051 (1.29 ) 0.086 ( 2.18 ) 0.180 ( 4.57 ) 0.160 ( 4.06 ) 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.091 ( 2.31 ) 0.067 ( 1.70 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.059 ( 1.50 ) 0.008 ( 0.203 ) 0.035 ( 0.89 ) 0.004 ( 0.102 ) Ratings at 25 o C ambient temperature unless otherwise specified. Resistive or inductive load. 0.209 ( 5.31 ) 0.185 ( 4.70 ) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RATINGS EFM101 EFM102 EFM103 EFM104 EFM105 EFM106 EFM107 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 Maximum RMS Voltage VRMS 35 70 105 140 210 280 420 Volts VDC 50 100 150 200 300 400 600 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at TA = 55 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Square Time IO 1.0 Amps IFSM 30 Amps IT RQJA 3.7 A 2S RQJL 35 2 Typical Thermal Resistance (Note 3) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Volts 85 0 CJ 10 T J, TSTG -55 to + 150 SYMBOL EFM101 EFM102 EFM103 EFM104 EFM105 EFM106 EFM107 C/W pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage VF @TA = 25oC o @TA = 150 C Maximum Reverse Recovery Time (Note 1) NOTES : 1. Reverse Re covery Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts 3. Thermal Resistance : Mounted on PCB. 0.95 1.25 1.50 35 Volts 5.0 MAmps 2.0 m Amps IR trr UNITS 50 nSec 2020-11 REV:F RATING AND CHARACTERISTICS CURVES ( EFM101 THRU EFM107 ) trr 50 NONINDUCTIVE (+) 25 Vdc (approx) (-) +0.5A 10 NONINDUCTIVE (-) D.U.T 0 PULSE GENERATOR (NOTE 2) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) -0.25A (+) NOTES: 1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. -1.0A 2. Rise Time = 10ns max. Source Impedance = 50 ohms. 1cm SETTIME BASE FOR14~ 20/1 ns/cm AVERAGE FORWARD CURRENT, (A) 1.25 1.00 0.75 0.50 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.25 0 0 25 50 75 100 125 150 O AMBIENT TEMPERATURE, ( C) FIG.2 TYPICAL FORWAR RD CURRENT DERATING CURVE 175 INSTANTANEOUS REVERSE CURRENT, (MA) CTER RISTIC FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARAC 10000 TA =150 1000 O C 10 1.0 0.1 TA = 25 OC 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVER RSE CHAR RACTERISTICS 140 TJ = 25 OC 3.0 EFM107 1.0 EFM105~EFM106 0.3 0.1 EFM101~EFM104 0.03 0.01 Pulse Width=300uS 1% Duty Cycle 0 0.5 1.0 1.5 2.0 2.5 200 PEAK FORWARD SURGE CURRENT, (A) 20 10 3.0 8.3ms Single Half Sine-Wave (JEDED Method) 100 50 30 20 10 3.5 5 1 INSTANTANEOUS FORWARD VOLTAGE, (V) 10 TJ = 25 OC 100 60 40 20 10 6 4 2 0.1 0.2 100 FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 200 1 50 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( EFM101 THRU EFM107 ) 0.4 1.0 2 4 10 20 40 REVERSE VOLTAGE, (V) FIG.6 TYPICAL JUNCTION CAPACITANCE 100 Mounting Pad Layout 0.074 MAX. (1.88 MAX.) 0.066MIN. (1.68 MIN.) 0.060 MIN. (1.52 MIN.) 0.208 (5.28) REF Dimensions in inches and (millimeters) RECTRON Attachment information about EFM10X 1. Internal Circuit Anode Cathode 2. Marking on the body E Part No. X Voltage-code V X X X Cathode Band Plant - code Year – code (Y: Last digit of year & A:2010,B:2011……) 1-------50V 2-------100V 5-------300V 6-------400V 3-------150V 4-------200V 7-------600V Week – code (WW:01~52) E X Part No. H Voltage-code V Cathode Band Plant - code Year – code (Y: Last digit of year & A:2010,B:2011……) X X X 1-------50V 2-------100V 3-------150V 4-------200V Week – code (WW:01~52) 5-------300V 6-------400V 7-------600V RECTRON Attachment information about EFM10X 4. Items marked on the reel box and carton 4.1 On the reel (for –T & -W) CUSTOMER TYPE QUANTITY LOT NO. Q.A. REMARK 4.2 On the box (for –T & -W) TYPE QUANTITY LOT NO. Q.A. 4.3 On the carton CUSTOMER TYPE QUANTITY LOT NO. REMARK PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SMA PACKAGE SMA PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W 7,500 15,000 --- --- 330 360*355*360 120,000 15.2 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 2,000 8,000 --- --- 178 390*205*310 64,000 7.8 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.