FM1600W

FM1200W THRU FM2000W HIGH VOLTAGE RECTIFIER VOLTAGE RANGE 1200 to 2000 Volts CURRENT 0.2 to 0.5 Ampere FEATURES * * * * Low cost Low leakage Low forward voltage drop High current capability MECHANICAL DATA Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any .209 (5.31) .185 (4.70) .110 (2.79) .086 (2.18) .180 (4.57) .091 (2.31) .067 (1.70) .160 (4.06) .008 (0.20) .011 (0.28) .007 (0.18) .067 (1.70) .051 (1.30) .010 (0.25) * * * * MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o .059 (1.50) .035 (0.89) Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) SYMBOL FM1200W FM1500W FM1800W FM2000W UNITS Maximum Recurrent Peak Reverse Voltage VRRM 1200 1500 1800 2000 Volts Maximum RMS Volts VRMS 840 1050 1260 1400 Volts VDC 1200 1500 1800 2000 Volts 200 mAmps RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T A = 50 C IO Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Junction Capacitance (Note) Operating and Storage Temperature Range 500 I FSM 25 Amps I 2T 2.59 AS CJ 35 pF T J , T STG -55 to + 150 2 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) SYMBOL CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.5A/0.2A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A =125 o C Maximum Full Load Reverse Current Average, Full Cycle .375”, (9.5mm) lead length at TL = 75oC NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts. VF FM1200W FM1500W FM1800W 2.0 5.0 IR FM2000W UNITS 3.0 Volts uAmps 50 30 uAmps 2016-09 REV:B FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD 500 Single Phase Half Wave 60Hz Inductive or Resistive Load 400 300 00 12 FM 200 W 80 0W 100 00 M1 FM 20 F W~ 0 0 SURGE CURRENT 70 60 8.3ms Single Half Sine-Wave (JEDEC Method) 50 40 30 20 10 0 1 50 100 150 175 AMBIENT TEMPERATURE, ( ) INSTANTANEOUS REVERSE CURRENT, (uA) AVERAGE FORWARD CURRENT, (mA) RATING AND CHARACTERISTIC CURVES ( FM1200W THRU FM2000W ) 10 100 NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 1000 100 TJ = 25 10 1.0 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON Mounting Pad Layout 0.074 MAX. (1.88 MAX.) 0.066MIN. (1.68 MIN.) 0.060 MIN. (1.52 MIN.) 0.208 (5.28) REF Dimensions in inches and (millimeters) Mark Description Aa b V Y W W Part No. Voltage-code (a:1~2, b:0~9-----18:1800V) Cathode Band Year – code (Y: Last digit of year & A:2010, B: 2011...) Week – code (WW: 01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER REEL CODE COMPONENT TAPE SPACE SPACE(mm) (mm) REEL DIA CARTON SIZE (mm) (mm) GROSS EA PER CARTON WEIGHT(Kg) SMX -T 1,500 --- --- 180 390*205*310 48,000 --- SMX -W 5,000 --- --- 330 355*360*350 80,000 15.20 1. REEL D Packing D Code (mm) -T 180 -W 330 Packing L W H Code (mm) (mm) (mm) -T 390 205 310 -W 355 360 350 2. CARTON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.