FM2000

FM2000 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE 2000 Volts CURRENT 1.0 Ampere FEATURES * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any DO-214AC 0.067 (1.70 ) 0.110 ( 2.79 ) 0.086 ( 2.18 ) 0.051 (1.29 ) 0.180 ( 4.57 ) 0.160 ( 4.06 ) 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.091 ( 2.31 ) 0.067 ( 1.70 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.059 ( 1.50 ) 0.035 ( 0.89 ) 0.008 ( 0.203 ) 0.004 ( 0.102 ) o Ratings at 25 C ambient temperature unless otherwise specified. 0.209 ( 5.31 ) 0.185 ( 4.70 ) resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL FM2000 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 2000 Volts Maximum RMS Voltage VRMS 1400 Volts VDC 2000 Volts IO 1.0 Amps I FSM 30 Amps 3.75 A 2 Sec RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Terminals Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I2t Current Squarad Time Typical Thermal Resistance (Note 1) RθJA 45 0 C/W Typical Thermal Resistance (Note 1) RθJT 10 0 C/W Typical Junction Capacitance (Note 2) CJ 15 Operating Temperature Range TJ -55 to + 175 0 C T STG -55 to + 175 0 C Storage Temperature Range pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC FM2000 UNITS VF 1.1 Volts μA o Maximum Average Reverse Current @T A = 25 C at Rated DC Blocking Voltage @T A = 150 o C Typical Reverse Recovery Time (Note 3) SYMBOL IR trr NOTES : 1. Thermal Resistance :Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. Test Conditions: IF= 0.5A, IR= -1.0A, IRR= -0.25A. 2.0 1.0 mA 2.0 uSec 2020-01 REV: B AVERAGE FORWARD CURRENT, (A) 2.0 1.5 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0.5 0 0 25 50 75 100 125 150 175 INSTANTANEOUS REVERSE CURRENT, (μA) RATING AND CHARACTERISTICS CURVES ( FM2000 ) 10000 1000 O 10 TA = 150 C 1.0 TA = 25 OC 0.1 0.01 0 20 O Terminals Temperature ( C) CJ, JUNCTION CAPACITANCE, (pF) 10 1.0 TJ = 25 OC Pulse width=300μS 1% Duty Cycle 0 0.5 1.0 1.5 2.0 2.5 3.0 60 80 100 120 140 FIG.2 MAXIMUM REVERSE CHARACTERISTICS 20 3.5 4.0 4.5 40 TJ = 25 OC 20 10 8 6 4 2 1 5.0 0.4 0.1 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.0 4 40 80 FIG.4 TYPICAL JUNCTION CAPACITANCE 30 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 0 1 10 REVERSE VOLTAGE, (V) FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 0.1 40 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Mounting Pad Layout 0.074 MAX. (1.88 MAX.) 0.066MIN. (1.68 MIN.) 0.060 MIN. (1.52 MIN.) 0.208 (5.28) REF Dimensions in inches and (millimeters) Marking Description A 2 0 V Y W W Part No. Voltage-code 2 0 -------2000V Cathode Band Year – code (Y:Last digit of year & A:2010,B:2011….. ) Week – code (WW:01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SMA PACKAGE SMA PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W 7,500 15,000 --- --- 330 360*355*360 120,000 15.2 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 2,000 8,000 --- --- 178 390*205*310 64,000 7.8 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.