FM201C

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION FM201C THRU FM207C SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.24 gram DO-214AB MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 0.125 (3.17) 0.115 (2.92) 0.280 (7.11) 0.260 (6.60) 0.245 (6.22) 0.220 (5.59) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.320 (8.13) 0.305 (7.75) 0.012 (0.305) 0.006 (0.152) 0.008 (0.203) 0.004 (0.102) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermaesistance Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO I FSM (Note 2)R θ JL (Note 3)R θ JA CJ T J, T STG FM201C FM202C FM203C FM204C FM205C FM206C FM207C UNITS Volts Volts Volts Amps Amps 0 0 50 35 50 100 70 100 200 140 200 400 280 400 2.0 50 20 50 30 -55 to + 150 600 420 600 800 560 800 1000 700 1000 C/ W C/ W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 2.0A DC Maximum Average Reverse Current at Rated DC Blocking Voltage @T A = 2 5 o C @T A = 1 25 o C SYMBOL VF IR FM201C FM202C FM203C FM204C FM205C FM206C FM207C UNITS Volts uAmps uAmps 2002-6 1.1 5.0 125 NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. Thermal resistance junction to terminal, 5X5mm 2 c opper pads to each terminal. 3. Thermal resistance junction to ambient, 5X5mm2 c opper pads to each terminal. RATING AND CHARACTERISTIC CURVES ( FM201C THRU FM207C ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 10 4 2 1.0 .4 .2 .1 .04 .02 .01 .6 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 4 1.0 .4 .1 .04 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) TJ = 25 TJ = 100 TJ = 25 Pulse Width=300uS 1% Duty Cycle 2.5 2.0 1.5 1.0 .5 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( ) Single Phase Half Wave 60Hz Resistive or Inductive Load PEAK FORWARD SURGE CURRENT, (A) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 80 60 40 20 0 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine-Wave (JEDED Method) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) 200 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) TJ = 25 INSTANTANEOUS REVERSE CURRENT, (uA) RECTRON Mounting Pad Layout 0.185 MAX. (4.69 MAX.) 0.121 MIN. (3.07 MIN.) 0.060 MIN. (1.52 MIN.) 0.320 REF Dimensions in inches and (millimeters) RECTRON