FM206

FM201 THRU FM207 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * * * * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.098 gram P/N suffix V means AEC-Q101 qualified, e.g:FM201V P/N suffix V means Halogen-free 0.083 (2.11) 0.077 (1.96) 0.155 (3.94) 0.130 (3.30) MECHANICAL DATA 0.180 (4.57) 0.160 (4.06) * Epoxy : Device has UL flammability classification 94V-0 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.008 (0.203) 0.004 (0.102) o Ratings at 25 C ambient temperature unless otherwise specified. 0.220 (5.59) 0.205 (5.21) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) SYMBOL RATINGS FM201 FM202 FM203 FM204 FM205 FM206 FM207 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 75 oC IO Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Thermaesistance Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range 2.0 Amps I FSM 60 Amps I 2T 15 2 AS C/ W (Note 2)RQ JL 20 0 (Note 3)RQ JA 50 0 CJ 30 T J, T STG -65 to + 175 SYMBOL FM201 FM202 FM203 FM204 FM205 FM206 FM207 VF 1.0 Volts 1.0 uAmps 800 uAmps C/ W pF 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 2.0A DC o Maximum Average Reverse Current @T A = 25 C at Rated DC Blocking Voltage @T A = 150 o C IR NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. Thermal resistance junction to terminal, 5X5mm 2 copper pads to each terminal. 3. Thermal resistance junction to ambient, 5X5mm2 copper pads to each terminal. UNITS 2018-08 REV:D FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE INSTANTANEOUS FORWARD CURRENT, (A) 2.0 1.5 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load .5 0 8.3ms Single Half Sine-Wave (JEDED Method) 60 40 20 0 1 4 2 1.0 .4 .2 .1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz TJ = 25 Pulse Width=300uS 1% Duty Cycle .04 .02 .01 .6 FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 80 20 10 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( ) INSTANTANEOUS REVERSE CURRENT, (uA) 0 PEAK FORWARD SURGE CURRENT, (A) FIG. 2 - MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 2.5 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 - MAXIMUM REVERSE CHARACTERISTICS 1000 800 TA = 150 100 1 TA = 25 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( FM201 THRU FM207 ) 200 100 60 40 20 10 6 4 TJ = 25 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) RECTRON Mounting Pad Layout 0.106 MAX. (2.69 MAX.) 0.083MIN. ( 2.10 MIN.) 0.050 MIN. (1.27 MIN.) 0.220 (5.58) REF Dimensions in inches and (millimeters) Marking Description 2BX V X Cathode Band Year – code (Y: Last digit of year& A: 2010, B: 2011……) Part No. Voltage-code X X 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V Week – code (WW: 01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX SMB -T 500 2,000 --- --- 178 390*205*310 16,000 ---- SMB -W 3,000 6,000 --- --- 330 360*355*360 48,000 13.90 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.