FM2500W

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION FM2500W HIGH VOLTAGE RECTIFIER VOLTAGE 2500 Volts CURRENT 0.15 Ampere FEATURES * * * * Low cost Low leakage Low forward voltage drop High current capability SMX MECHANICAL DATA * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any .209 (5.31) .185 (4.70) .110 (2.79) .086 (2.18) .091 (2.31) .067 (1.70) .067 (1.70) .051 (1.30) .010 (0.25) .011 (0.28) .007 (0.18) .180 (4.57) .160 (4.06) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) .059 (1.50) .035 (0.89) MAXIMUM RATINGS ( At T A = 2 5oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 5 0 oC Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Peak Forward Surge Current, 10 ms single half sine-wave superimposed on rated load at 105oC (JEDEC method) Typical Junction Capacitance (Note) Operating and Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.15A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 2 5 o C @T A = 100 o C SYMBOL VF IR FM2500W 2.0 5.0 50 30 uAmps 2004-8 UNITS Volts uAmps o SYMBOL VRRM VRMS VDC IO I FSM I FSM CJ T J , T STG FM2500W 2500 1750 2500 0.15 30 3.0 35 -55 to + 150 .008 (0.20) UNITS Volts Volts Volts Amps Amps Amps pF 0 C Maximum Full Load Reverse Current Average, Full Cycle .375”, (9.5mm) lead length at TL = 7 5oC NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts. RATING AND CHARACTERISTIC CURVES ( FM2500W ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 150 120 90 60 Single Phase Half Wave 60Hz Inductive or Resistive Load FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (mA) SURGE CURRENT 70 60 50 40 30 20 10 0 1 10 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine-Wave (JEDEC Method) 30 0 0 50 100 150 175 AMBIENT TEMPERATURE, ( ) INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 10 1.0 TJ = 25 0.1 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON