FM4007

FM4001 THRU FM4007 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.057 gram P/N suffix V means AEC-Q101 qualified, e.g:FM4001V P/N suffix V means Halogen-free DO-214AC 0.067 (1.70 ) 0.051 (1.29 ) MECHANICAL DATA 0.110 ( 2.79 ) 0.086 ( 2.18 ) 0.180 ( 4.57 ) 0.160 ( 4.06 ) * Epoxy : Device has UL flammability classification 94V-0 0.012 ( 0.305 ) 0.006 ( 0.152 ) 0.091 ( 2.31 ) 0.067 ( 1.70 ) 0.059 ( 1.50 ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.008 ( 0.203 ) 0.004 ( 0.102 ) 0.035 ( 0.89 ) Ratings at 25 o C ambient temperature unless otherwise specified. 0.209 ( 5.31 ) 0.185 ( 4.70 ) resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL FM4001 FM4002 FM4003 FM4004 FM4005 FM4006 FM4007 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Ambient Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 1.0 Amps I FSM 30 Amps 3.7 A 2 /Sec 2 I t Current Squarad Time Volts IO 0 C/W 0 C/W Typical Thermal Resistance (Note 1) RQJA Typical Thermal Resistance (Note 1) RQJL Typical Junction Capacitance (Note 2) CJ 15 Operating Temperature Range TJ -55 to + 175 0 C T STG -55 to + 175 0 C Storage Temperature Range 80 27 30 pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 150 C Maximum Reverse Recovery Time (Note 4) FM4001 VF o IR trr NOTES : 1. Thermal Resistance :Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. “ROHS compliant”. 4. Test Conditions: IF= 0.5A, IR= -1.0A, IRR= -0.25A. FM4002 FM4003 FM4004 FM4005 FM4006 FM4007 UNITS 1.0 Volts 0.5 uA 100 uA 2.5 uSec 2021-08 REV:G RATING AND CHARACTERISTICS CURVES ( FM4001 THRU FM4007 ) 1.5 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0.5 0 0 25 50 75 100 125 150 175 1000 INSTANTANEOUS FORWARD CURRENT, (μA) AVERAGE FORWARD CURRENT, (A) 2.0 100 TA = 150 OC 10 1.0 TA = 25 OC 0.1 0.01 0 20 40 60 80 100 120 140 O Lead Temperature ( C) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2MAXIMUM REVERSE CHARACTERISTICS CJ, JUNCTION CAPACITANCE, (pF) 10 1.0 TJ = 25 OC Pulse width=300μS 1% Duty Cycle 0.1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 40 TJ = 25 OC 20 10 8 6 4 2 1 5.0 0.4 0.1 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.0 4 40 80 FIG.4 TYPICAL JUNCTION CAPACITANCE 30 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 0 1 10 REVERSE VOLTAGE, (V) FIG.3MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A) 20 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Mounting Pad Layout 0.074 MAX. (1.88 MAX.) 0.066MIN. (1.68 MIN.) 0.060 MIN. (1.52 MIN.) 0.208 (5.28) REF Dimensions in inches and (millimeters) Marking Description A X V Y W W Cathode Band Year – code (Y:Last digit of year & A:2010,B:2011......) Part No. Voltage-code 1-------50V 2-------100V 3-------200V 4-------400V Week – code (WW:01~52) 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SMA PACKAGE SMA PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W 7,500 15,000 --- --- 330 360*355*360 120,000 15.2 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 2,000 8,000 --- --- 178 390*205*310 64,000 7.8 1. BOX Packing L W H Code (mm) (mm) (mm) -T 182 182 68 -W 338 338 40 2. REEL D Packing D Code (mm) -T 178 -W 330 Packing L W H Code (mm) (mm) (mm) -T 390 205 310 -W 360 355 360 3. CARTON REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-FLAT MELF ( SMA/SMB/SMC ) P0 P1 d E F B A P o T W MAX. 3 A D1 D2 o MAX. 3 R W1 D C Fig.: Configuration of FLAT MELF TAPING (SMA/SMB/SMC) ITEM Carrier width Carrier length Carrier depth Sprocket hole SYMBOL A B C d DO214AC (SMA) mm(inch) 2.6 0.15 (0.102 0.006) 5.15 0.15 (0.203 0.006) 2.3 0.15 (0.091 0.006) 1.5 0.1 (0.059 0.004) DO214AA (SMB) mm(inch) 3.65 0.1 (0.144 0.004) 5.69 0.1 (0.224 0.004) 2.67 0.1 (0.105 0.004) 1.5 0.1 (0.059 0.004) Reel outside diameter Reel inner diameter Feed hole diameter Strocket hole position Punch hole position Punch hole pitch D D1 D2 E F P 178 2.0 (7.0 0.079) 50 Min. 13 13 0.5 (0.512 0.020) 1.5 1.5 0.1 (0.059 0.004) 5.65 0.05 (0.222 0.002) 5.65 4.0 0.1 (0.157 0.004) 8.0 Sprocket hole pitch Embossment center Totall tape thickness Tape width Reel width P0 P1 T W W1 4.0 0.1 (0.157 2.0 0.1 (0.079 0.30 0.05 (0.012 12.0 0.2 (0.472 16.8 2.0 (0.661 178 0.004) 0.004) 0.002) 0.008) 0.079) 2.0 (7.0 0.079) DO214AB (SMC) mm(inch) 6.0 0.1 (0.236 0.004) 8.30 0.1 (0.327 0.004) 2.5 0.1 (0.098 0.004) 1.5 0.1 (0.059 178 2.0 (7.0 0.004) 0.079) 50 Min. 50 Min. 13 0.5 (0.512 0.020) 0.5 (0.512 0.020) 0.1 (0.059 0.004) 1.5 0.1 (0.059 0.004) 0.05 (0.222 0.002) 7.65 0.05 (0.301 0.002) 8.0 0.1 (0.315 0.004) 0.1 (0.315 0.004) 4.0 2.0 0.1 (0.157 0.004) 0.1 (0.079 0.004) 0.6 Max. 12.0 0.2 (0.472 0.008) 16.8 2.0 (0.661 0.079) Note: 1.Devices are packed in accordance with EIA standard RS-481-A and specification given above. 2.Available on 7 inch ( 1500 ct. ) or 13 inch ( 5000 ct. ) diameter reels. 4.0 4.0 0.1 (0.157 0.004) 0.1 (0.157 0.004) 0.6 Max. 16.0 0.2 (0.630 0.008) 24.0 2.0 (0.945 0.079) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.