FM505B

SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER FM501B THRU FM507B VOLTAGE RANGE 50 to 1000 Volts CURRENT 5.0 Amperes FEATURES * * * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any P/N suffix V means AEC-Q101 qualified, e.g:FM501BV P/N suffix V means Halogen-free SMB MECHANICAL DATA 0.083 (2.11) 0.155 (3.94) 0.077 (1.96) 0.130 (3.30) * Epoxy : Device has UL flammability classification 94V-0 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.060 (1.52) 0.008 (0.203) 0.030 (0.76) 0.004 (0.102) Ratings at 25 o C ambient temperature unless otherwise specified. 0.220 (5.59) 0.205 (5.21) resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL FM501B Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o T A = 75 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time FM502B FM503B FM504B FM505B FM506B FM507B UNITS Volts IO 5.0 Amps I FSM 150 Amps 2 93.3 IT 2 A S Typical Thermal Resistance (Note 1) RθJA 35 0 Typical Thermal Resistance (Note 1) RθJL 10 0 Typical Junction Capacitance (Note 2) CJ 60 Operating Temperature Range TJ -55 to + 150 0 C T STG -55 to + 150 0 C Storage Temperature Range C/W C/W pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 5.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 150 o C FM501B VF IR NOTES : 1. Thermal Resistance :Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. " ROHS compliant". 4. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. FM502B FM503B FM504B 1.1 FM505B FM506B FM507B UNITS Volts 1.0 μA 1.0 mA 2020-04 REV: B INSTANTANEOUS FORWARD CURRENT, (MA) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( FM501B THRU FM507B) 8.0 6.0 4.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 2.0 0 0 25 50 75 100 125 150 175 10000 TA = 150 OC 1000 10 TA = 25 OC 1.0 0.1 0.01 0 20 O AMBIENT TEMPERATURE, ( C) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE CJ, JUNCTION CAPACITANCE, (pF) 1.0 TJ = 25 OC Pulse width=300MS 1% Duty Cycle 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 120 140 4.0 4.5 100 80 60 40 20 10 5.0 TJ = 25 OC 200 0.4 0.1 1.0 4 10 40 80 REVERSE VOLTAGE, (V) FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 TYPICAL JUNCTION CAPACITANCE 150 8.3mS Single Half Sine-Wave JEDEC Method 120 90 60 30 0 1 80 400 INSTANTANEOUS FORWARD VOLTAGE, (V) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A) 10 0 60 FIG.2 MAXIMUM REVERSE CHARACTERISTICS 20 0.1 40 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIIVE FORWARD SURGE CURRENT Mounting Pad Layout 0.185 MAX. (4.69 MAX.) 0.121MIN. (3.07 MIN.) 0.060 MIN. (1.52 MIN.) 0.320 (8.127 ) REF Dimensions in inches and (millimeters) Marking Description 5 C X Rectron Logo Part No. Voltage-code V Y W W Cathode Band Year – code: (Y:Last digit of year) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V Week – code: (WW:01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SMB PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -W/-T 3,000 6,000 --- --- 330 360*355*360 48,000 13.90 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.