FMMT591

TECHNICAL SPECIFICATION SEMICONDUCTOR SOT-23 BIPOLAR TRANSISTORS TRANSISTOR(PNP) R ECTRON FMMT591 * Power dissipation PCM : 0.5 W (Tamb=25OC) * Collector current ICM : -1 A * Collector-base voltage V(BR)CBO : -80 V * Operating and storage junction temperature range TJ,Tstg: -55OC to +150OC FEATURES SOT-23 COLLECTOR 3 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.008 gram Marking: 591 BASE 1 EMITTER 2 0 .055(1.40) 0.047(1.20) 0.006(0.15) 0.003(0.08) 0.020(0.50) 0.012(0.30) 0.043(1.10) 0.035(0.90) 0.004(0.10) 0.000(0.00) 0.020(0.50) 0.012(0.30) 0.100(2.55) 0.089(2.25) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase , half wave, 60H Z , resistive or inductive load. For capacitive load, derate current by 20%. O 0.019(2.00) 0.071(1.80) 1 3 2 0.118(3.00) 0.110(2.80) Dimensions in inches and (millimeters) ELECTRICAL CHARACTERISTICS ( @ TA = 25OC unless otherwise noted ) CHARACTERISTICS Collector-base breakdown voltage (IC= -100mA, IE=0) Collector-emitter breakdown voltage (IC= -10mA, IB=0) (Note 1) Emitter-base breakdown voltage (IE= -100mA, IC=0) Collector cut-off current (VCB= -60V, IE=0) Emitter cut-off current (VEB= -4V, IC=0) DC current gain (VCE= -5V, IC= -1mA) DC current gain (VCE= -5V, IC= -500mA) (Note 1) DC current gain (VCE= -5V, IC= -1A) (Note 1) DC current gain (VCE= -5V, IC= -2A) (Note 1) Collector-emitter saturation voltage (IC= -500mA, IB= -50mA) (Note 1) Collector-emitter saturation voltage (IC= -1A, IB= -100mA) (Note 1) Base-emitter saturation voltage (IC= -1A, IB= -100mA) (Note 1) Base-emitter voltage ((VCE= -5V, IC= -1A) (Note 1) Transition frequency (VCE= -10V, IC= -50mA, f=100MHZ) Collector output capactitance (VCB= -10V, f=1MHZ) SYMBOL V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO hFE(1) hFE(2) hFE(3) hFE(4) VCE(sat)1 VCE(sat)2 VBE(sat) VBE fT Cob MIN -80 -60 -5 100 100 80 15 150 TYP MAX -0.1 -0.1 300 -0.3 -0.6 -1.2 -1 10 UNITS V V V mA mA V V V V MHZ pF 2006-3 Notes 1: Measured under pulsed conditions, Pulse width=300ms, Duty cycle < 2%. 2: "Fully ROHS compliant", "100% Sn plating (Pb-free)". RATING AND CHARACTERISTICS CURVES ( FMMT591 ) 0.6 0.5 0.4 0.3 0.2 0.1 0 Ic / IB=10 Ic / IB=50 +25 C O 0.6 0.5 0.4 0.3 0.2 0.1 0 Ic / IB=10 VCE(sat) - (V) VCE(sat) - (V) -55 C O +25 C O +100 C O 1mA 10mA 100mA 1A 10A 1mA 10mA 100mA 1A 10A Ic - COLLECTOR CURRENT Figure1 VCE(sat) vs IC 400 VCE= -5V Ic / IB=10 Ic - COLLECTOR CURRENT Figure2 VCE(sat) vs IC 1.0 300 +100 C O 0.8 hFE - Typical Gain VBE(sat) - (V) 200 +25 C O 0.6 0.4 0.2 0 -55 C O +25 C O +100 C O 100 -55 C O 0 1mA 10mA Ic - COLLECTOR CURRENT 100mA 1A 10A 1mA 10mA Ic - COLLECTOR CURRENT 100mA 1A 10A Figure3 hFE vs IC Figure4 VBE(sat) vs IC 10 1.2 1.0 0.8 VCE= -5V IC, COLLECTOR CURRENT (A) 1 VBE(on) - (V) 0.6 0.4 0.2 0 -55 C O +25 C O +100 C O 0.1 DC 1s 100ms 10ms 1ms 100us 1mA 10mA 100mA 1A 10A 0.01 Figure5 VBE(on) vs IC IC - COLLECTOR CURRENT 0.1V VCE - COLLECTOR-EMITTER VOLTAGE (V) 1V 10V 100V Figure6 Safe Operating Area R ECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. R ECTRON