HVP8

HVP5 THRU HVP16 HIGH VOLTAGE ASSEMBLIED RECTIFIER VOLTAGE RANGE 5000 to 16000 Volts CURRENT 0.75 Amperes FEATURES * * * * * * Low cost Low leakage Isolated case Surge overload rating - 50 amperes peak Mounting position: Any Low forward voltage drop MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) o SYMBOL HVP5 HVP8 HVP10 HVP12 HVP14 HVP15 HVP16 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 5 8 10 12 14 15 16 K Volts Maximum RMS Voltage VRMS 3.5 5.6 7.0 8.4 9.8 10.5 11.2 K Volts Maximum DC Blocking Voltage VDC 5 8 10 12 14 15 16 K Volts RATINGS o Maximum Average Forward Rectified Current at T A = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time Operating and Storage Temperature Range IO 750 mAmps I FSM 50 Amps I2t 10.37 A2/Sec T J, T STG -55 to + 150 0 C ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) o CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.75A DC Maximum DC Reverse Current at Rated DC Blocking Voltage NOTES: Enough heat sink must be considered in application. SYMBOL HVP5 VF 8.0 IR HVP8 HVP10 HVP12 HVP14 14.0 5.0 HVP15 HVP16 UNITS Volts uAmps 2016-09 REV: B RATING AND CHARACTERISTIC CURVES ( HVP5 THRU HVP16 ) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 750 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (mA) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE Single Phase Half Wave 60Hz Inductive or Resistive Load 600 450 300 150 0 0 50 100 150 AMBIENT TEMPERATURE, ( 60 50 8.3ms Single Half Sine-Wave (JEDEC Method) 40 30 20 10 0 1 175 10 100 NUMBER OF CYCLES AT 60Hz ) FIG. 4 - TYPICAL INSTANTANEOUS FORWARD FIG. 3 - TYPICAL REVERSE CHARACTERISTICS .6 .4 .2 .1 TJ = 25 .06 .04 .02 .01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 6 8 P1 HV 0~ P1 10 TJ = 25 Pulse Width = 300us 1% Duty Cycle 1.0 0.1 0 HV 1.0 100 VP 2 ~H 4 P5 6 1000 HV INSTANTANEOUS FORWARD CURRENT, (mA) INSTANTANEOUS REVERSE CURRENT, (uA) CHARACTERISTICS 10 2 4 6 8 10 12 14 16 18 INSTANTANEOUS FORWARD VOLTAGE, (V) RECTRON Attachment information about HVPXX 1. Marking on the body Cathode Band Rectron Logo V Y M Year-code: (Y:Last digit of year& A:2010,B:2011......) Month-code: (M:0~9,O,N,D) 2. Items marked on the carton CUSTOMER TYPE QUANTITY LOT NO. REMARK Part No. HVP X X Voltage-code 5-------5000V 8-------8000V 10----10000V 12----12000V 14-------14000V 15-------15000V 16-------16000V DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.