KBL404

KBL401 THRU KBL410 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes FEATURES * * * * * Silver-plated copper leads Surge overload rating: 125 amperes peak Low leakage Mounting position: Any Low forward voltage KBL .770(19.55) .730(18.54) .157(4.0)*45( MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O .587(14.9) .547(13.9) .825(16.3) .605(15.3) ＋　　　Ａ　Ｃ　　　－ .750 MIN. (19.0) .052(1.3)DIA. .048(1.2)TYP. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .210(5.33) .190(4.83) Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .237(6.0) .217(5.5) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL KBL401 KBL403 KBL404 KBL406 KBL408 KBL410 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T A = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) KBL402 IO 4.0 Amps I FSM 125 Amps I T 65 A S 2 Current Squared Time Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range Rθ JC 22 Rθ JA 28 TJ, T STG -55 to + 150 2 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 4.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25o C @T A = 150o C SYMBOL VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " ROHS compliant" 3. Measureed at 1MHz and applied reverse voltage of 4.0 volts. KBL401 KBL402 KBL403 KBL404 1.1 KBL406 KBL408 KBL410 UNITS Volts 10 1000 uAmps 2020-04/10 REV:A RATING AND CHARACTERISTICS CURVES (KBL401 THRU KBL410) FIG.1-DERATING CURVE OUTPUT RECTIFIED CURRENT FLG.1-MAXIMUM FORWARD SUNRGE CURRENT AVERAGE FORWARD OUTPUT CURRENT AMPERES PEAK FORWARD SURGE CURRENT AMPERES 6.0 150 125 T J=25°C 1 10 5.0 4.0 3.0 2.0 1.0 50 0 100 NUMBER OF CYCLETS AT 60Hz 100 150 AMBIENT TEMPERATURE °C FIG.4– TYPICAL REVERSE CHARACTERISTICS FIG.4-TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT MICROAMPERES INSTANTANEOUS FORWARD CURRENT,(A) 10 1.0 0.1 T J=25°C PULSE WIDTH:300us 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,VOLTS 1.0 T J = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE " " " "" " " Marking Description Rectron Logo KBL40X VYWW Year – code (Y:Last digit of year) + AC - Week – code WW:01~52 Part No. Voltage-code 1-------50V 6-------600V 2-------100V 3-------200V 4-------400V 8-------800V 10-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE KBL PACKING CODE -C EA PER BOX 1,150 INNER BOX SIZE CARTON SIZE (mm) (mm) 49*14.5*13.2 49.5*32.5*15.5 EA PER CARTON 2,300 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.