KSLDB3200S

KSLDB3200S SCHOTTKY BARRIER RECTIFIER VOLTAGE 200 Volts CURRENT 3.0 Ampere FEATURES * * * * * * * * Good for automation insertion Surge overload rating - 120 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.33 gram SLDBS .009(0.220) .177 (4.5) .169 (4.3) .236 (6.0) .252 (6.4) MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O * Halogen-free .007(0.180) .0039 (0.100) .028 (0.700) .0036 (0.092) .012 (0.300) .028 (0.7) .020 (0.5) .135 (3.45) .127 (3.25) Pin 2 Pin 1 Pin 4 Pin 3 .200 (5.1) .192 (4.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAX .059 (1.5) o Ratings at 25 C ambient temperature unless otherwise specified. .161 (4.1) .153 (3.9) resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) RATINGS SYMBOL KSLDB3200S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 200 Volts Maximum RMS Bridge Input Voltage VRMS 140 Volts Maximum DC Blocking Voltage VDC 200 Volts IO 3.0 Amps I FSM 120 Amps 60 A 2S Maximum Average Forward Output Current at T A = 75 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 2 Typical Current Squared Time It Typical Thermal Resistance (Note 1) R θJA 50 RθJL 20 T J, T STG Operating and Storage Temperature Range -55 to + 150 0 C/W 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 3.0ADC KSLDB3200S UNITS VF .90 Volts o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 150 o C Note: 1.Thermal Resistance: Mounted on PCB. SYMBOL IR 2.0 uAmps 0.2 mAmps 2018-10 REV:A 120 8.3mS Single Half Sine-Wave JEDEC Method 100 80 60 40 20 0 1 86 14 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( KSLDB3200S) 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz 1000 1.2 1.6 2.0 4.0 TA = 150 OC AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 0.8 FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 1 - TYPICAL NON-REPETITIVE FORWARD SURGE CURRENT 100 10 1.0 TA = 25 OC 0.1 0 0.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 3.0 2.0 1.0 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.5 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE Mounting Pad Layout .252 Max. (6.40 Max.) .165 (4.2) .150 (3.8) .028Min. (0.70Min.) Dimensions in inches and (millimeters) .028 Min. (0.70 Min.) REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-SLDBS P0 P1 d E F B A P o T W MAX. 3 A R MAX. 3 o W1 D C Fig.: Configuration of SLDBS TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole D1 D2 SYMBOL A B C d SLDBS mm(inch) 6.0 0.1 (0.236 0.004) 8.30 0.1 (0.327 0.004) 2.5 1.5 0.1 (0.098 0.1 (0.059 0.004) 0.004) 330 2.0 (13.0 13 50 Min. 0.5 (0.512 0.020) 0.079) Reel outside diameter Reel inner diameter Feed hole diameter Strocket hole position Punch hole position Punch hole pitch D D1 D2 E F P 1.5 7.65 8.0 Sprocket hole pitch Embossment center Totall tape thickness Tape width Reel width P0 P1 T W W1 0.1 (0.157 0.004) 0.1 (0.157 0.004) 0.6 Max. 16.0 0.2 (0.630 0.008) 24.0 2.0 (0.945 0.079) 0.1 (0.059 0.004) 0.05 (0.301 0.002) 0.1 (0.315 0.004) 4.0 4.0 Note: 1.Devices are packed in accordance with EIA standard RS-481-A and specification given above. 2.13 inch ( 5000 ct. ) diameter reels. 1. BOX Packing L W H Code (mm) (mm) (mm) -T 340 340 40 2. REEL D Packing D Code (mm) -T 330 Packing L W H Code (mm) (mm) (mm) -T 355 360 360 3. CARTON PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SLDBS PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 5,000 10,000 --- --- 330 360*355*360 80,000 16.18 Marking Description - + Rectron Logo 3 K2 0 Part No. ~ V Y WW H X ~ Year – code: (Y:Last digit of year& A:2010, B:2011……) Week – code: (WW:01~52) Voltage-code 10-----100V TMTT # : (# :1~4) Halogen-free DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.