KSLDB340S

KSLDB340S SCHOTTKY BARRIER RECTIFIER VOLTAGE 40 Volts CURRENT 3.0 Ampere FEATURES * * * * * * * * Good for automation insertion Surge overload rating - 60 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.33 gram SLDBS .009(0.220) .177 (4.5) .169 (4.3) .236 (6.0) .252 (6.4) MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O * Halogen-free .007(0.180) .0039 (0.100) .028 (0.700) .0036 (0.092) .012 (0.300) .028 (0.7) .020 (0.5) .135 (3.45) .127 (3.25) Pin 2 Pin 1 Pin 4 Pin 3 .200 (5.1) .192 (4.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAX .059 (1.5) o Ratings at 25 C ambient temperature unless otherwise specified. .161 (4.1) .153 (3.9) resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL RATINGS Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 75 oC KSLDB340S UNITS 40 Volts VRMS 28 Volts VDC 40 Volts IO 3.0 Amps I FSM 60 Amps I 2t 14.9 A 2S Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Thermal Resistance (Note 1) R θJA 75 RθJL 17 T J, T STG Operating and Storage Temperature Range -55 to + 150 0 C/W 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 3.0ADC KSLDB340S UNITS VF 0.55 Volts o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Note: 1.Thermal Resistance: Mounted on PCB. SYMBOL IR 100 uAmps 5.0 mAmps 2018-09 REV:B 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 1 86 14 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( KSLDB340S) 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz 10000 1.2 1.6 2.0 4.0 AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 0.8 FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 1 - TYPICAL NON-REPETITIVE FORWARD SURGE CURRENT TA = 125 OC 1000 100 TA = 25 OC 10 1.0 0 0.4 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 3.0 2.0 1.0 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.5 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE Mounting Pad Layout .252 Max. (6.40 Max.) .165 (4.2) .150 (3.8) .028Min. (0.70Min.) Dimensions in inches and (millimeters) .028 Min. (0.70 Min.) REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-SLDBS P0 P1 d E F B A P o T W MAX. 3 A R o MAX. 3 D C Fig.: Configuration of SLDBS TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole D1 D2 SYMBOL A B C d SLDBS mm(inch) 6.0 0.1 (0.236 0.004) 8.30 0.1 (0.327 0.004) 2.5 1.5 Reel outside diameter Reel inner diameter Feed hole diameter Strocket hole position Punch hole position Punch hole pitch D D1 D2 E F P 0.1 (0.098 0.004) 0.1 (0.059 0.004) 330 2.0 (13.0 0.079) 50 Min. 13 0.5 (0.512 0.020) 1.5 0.1 (0.059 0.004) 7.65 0.05 (0.301 0.002) 8.0 0.1 (0.315 0.004) Sprocket hole pitch Embossment center Totall tape thickness Tape width Reel width P0 P1 T W W1 0.1 (0.157 0.004) 0.1 (0.157 0.004) 0.6 Max. 16.0 0.2 (0.630 0.008) 24.0 2.0 (0.945 0.079) 4.0 4.0 Note: 1.Devices are packed in accordance with EIA standard RS-481-A and specification given above. 2.13 inch ( 5000 ct. ) diameter reels. W1 1. BOX Packing L W H Code (mm) (mm) (mm) -T 340 340 40 2. REEL D Packing D Code (mm) -T 330 Packing L W H Code (mm) (mm) (mm) -T 355 360 360 3. CARTON PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SLDBS PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 5,000 10,000 --- --- 330 360*355*360 80,000 16.18 Marking Description - + Rectron Logo 3K 4 Part No. ~ V Y WW H X ~ Year – code: (Y:Last digit of year& A:2010, B:2011……) Week – code: (WW:01~52) Voltage-code 4-----40V TMTT # : (# :1~4) Halogen-free DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.