LDB107S

LDB101S THRU LDB107S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * Good for automation insertion Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any DB-LS MECHANICAL DATA .255 (6.5) .245 (6.2) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .410 (10.4) .360 (9.4) .045 (1.14) .035 (0.89) .060 (1.524) .037 (0.95 ) .346 (8.8) .144(3.65 ) .307 (7.8) .089 (2.25) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .205 (5.2) Single phase, half wave, 60 Hz, resistive or inductive load. .195 (5.0) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unle ss otherwise noted) SYMBOL R ATINGS Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Bridge Input Voltage VRMS Maximum DC Blocking Voltage VDC Ma ximum Average Forward Output Current at TA = 40 oC LDB101S LDB102S LDB103S LDB104S LDB105S LDB106S LDB107S UNITS 50 100 200 400 600 35 70 140 280 420 50 100 200 400 600 800 1000 Volts 560 700 Volts 800 1000 Volts IO 1.0 Amps I FSM 30 Amps I 2T 3.73 A 2S Typical Thermal Resistance R θJA 55 Typical Thermal Resistance R θJL 8 T J, T STG -55 to + 150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Square Time Operating a nd Storage Temperature Ra nge 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25 C unle ss otherwise noted) o SYMBOL CHARACTERISTICS Maximum Forward Voltage Drop per Bridge VF Element at 1.0A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C IR LDB101S LDB102S LDB103S LDB104S LDB105S LDB106S LDB107S UNITS 1.0 Volts 1.0 A mps 0.05 mAmps 2020-04/97 REV:B 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 1 2 4 6 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( LDB101S THRU LDB107S ) 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.0 1.5 2.0 2.5 FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 100 1.5 AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) TA = 125 OC 10 1 TA = 25 OC 1.0 0 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT TING CURVE DERAT Mounting Pad Layout .410 Max. (10.4 Max.) .205 (5.2) .195 (5.0) .042 Min. (1.10 Min.) Dimensions in inches and (millimeters) .060 Min. (1.52 Min.) Marking Description - + Part No. LD B 1 0 X ~ VYWW Rectron Logo Voltage-code ~ Year – code: (Y:Last digit of year& A:2010,B:2011……) Week – code: (WW:01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-----1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) DB-LS -C 4,000 450*140*84 464*305*283 EA PER CARTON WEIGHT(Kg) 24,000 16.45 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.