M1G

M1G THRU M7G SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * SMX Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction SMX MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 * Mounting position: Any * Weight: 0.057 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL M1G M2G M3G M4G M5G M6G M7G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Ambient Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 1.0 Amps I FSM 30 Amps 3.7 A 2 /Sec 2 I t Current Squarad Time 0 C/W 0 C/W Typical Thermal Resistance (Note 1) R JA R JL Typical Junction Capacitance (Note 2) CJ 15 Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Typical Thermal Resistance (Note 1) Storage Temperature Range 80 27 30 pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC VF o Maximum Average Reverse Current @T A = 25 C at Rated DC Blocking Voltage @T A = 100 C o IR NOTES : 1. Thermal Resistance :Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. " ROHS compliant" M1G M2G M3G M4G M5G M6G M7G UNITS 1.0 Volts 1.0 uA 50 uA 2021-12 REV:C RATING AND CHARACTERISTICS CURVES ( M1G THRU M7G ) 1.5 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0.5 0 0 25 50 75 100 125 150 1000 INSTANTANEOUS FORWARD CURRENT, (μA) AVERAGE FORWARD CURRENT, (A) 2.0 175 100 TA = 100 OC 10 TA = 25 OC 1.0 0.1 0.01 0 20 O AMBIENT TEMPERATURE, ( C) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE CJ, JUNCTION CAPACITANCE, (pF) 1.0 TJ = 25 OC Pulse width=300μS 1% Duty Cycle 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 120 140 4.0 4.5 TJ = 25 OC 20 10 8 6 4 2 1 5.0 0.4 0.1 1.0 4 10 40 80 REVERSE VOLTAGE, (V) FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 TYPICAL JUNCTION CAPACITANCE 30 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 0 1 80 40 INSTANTANEOUS FORWARD VOLTAGE, (V) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A) 10 0 60 FIG.2 MAXIMUM REVERSE CHARACTERISTICS 20 0.1 40 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Mounting Pad Layout 0.074 MAX. (1.88 MAX.) 0.066MIN. 1.68 MIN.) 0.060 MIN. (1.52 MIN.) 0.208 5.28) REF Dimensions in inches and (millimeters) RECTRON Attachment information about M1G THRU M7G 1. Internal Circuit Anode Cathode 2. Marking on the body Part No. Voltage-code A X V X Cathode Band Plant - code Year – code ˄Y: Last digit of year & A:2010,B:2011……) X X 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V Week – code (WW:01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX SMX -W 7,500 15,000 --- --- 330 360*355*360 120,000 SMX -T 2,000 8,000 --- --- 178 390*205*310 64,000 ----- DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.