MB6S

MB1S THRU MB10S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.5 Ampere FEATURES * * * * * * * Surge overload rating - 30 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any MSL: Level 1 MD-S MECHANICAL DATA 1 2 3 4 * Epoxy: Device has UL flammability classification 94V-O * UL listed under the recognized component directory, file #E94233. 0.028(0.9) .004(0.10) MAX. 0.020(0.5) 0.152(3.6) 0.157(4.0) 0.145(3.6) 0.193(4.9) 0.177(4.5) 0.260(6.6) 0.092(2.34) 0.157(4.0) 2.756(7.0) 0.108(2.74) 0.106(2.7) 0.091(2.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.014(0.35) o Ratings at 25 C ambient temperature unless otherwise specified. 0.006(0.15) Single phase, half wave, 60 Hz, resistive or inductive load. 0.193(4.9) 0.177(4.5) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) SYMBOL MB1S MB2S MB3S MB4S MB6S MB8S Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 Maximum DC Blocking Voltage VDC 50 100 200 400 600 RATINGS Maximum Average Forward Output Current at T A = 40 oC MB10S UNITS 1000 Volts 560 700 Volts 800 1000 Volts IO 0.5 Amps I FSM 30 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range R θJA 85 RθJL 20 T J, T STG -55 to + 150 0 C/W 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridge VF Element at 0.5A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Note: 1.” ROHS compliant” 2. Thermal Resistance: PCB mounted. IR MB1S MB2S MB3S MB4S 1.05 MB6S MB8S MB10S UNITS Volts 5.0 μAmps 0.5 mAmps 2019-08 REV:B 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 0 2 4 6 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( MB1S THRU MB10S ) 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz 100 1.5 2.0 2.5 1.5 AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 1.0 FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TA = 25 OC 10 1.0 0.1 0 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE Mounting Pad Layout .276 Max. (7.0 Max.) .105 (2.67) .095 (2.41) .035 Min. (0.90 Min.) Dimensions in inches and (millimeters) .030 Min. (0.76 Min.) MBxS VYWW Year – code (Y: Last digit of year & A:2010, B:2011...) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX MD-S -T 500 2,000 --- --- 178 390*205*310 16,000 --- MD-S -W 3,000 6,000 --- --- 330 360*355*360 48,000 15.50 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.