MD1F

MD1F THRU MD10F 100 1.0 35 MD1F MD2F MD4F MD6F MD8F MD10F 100 200 400 600 800 1000 70 140 280 420 560 700 100 200 400 600 800 1000 1.0 I 35 35 5 I A 2S 76 MD1F MD2F MD4F MD6F MD8F MD10F 1.0 0.5 o @T A = 25 C o @T A = 150 C 1.0 200 u u 2021-12/08 REV:E 40 8.3mS Single Half Sine-Wave JEDEC Method 35 30 25 20 15 10 1 2 4 6 20 10 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( MD1F THRU MD10F ) 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz 1.0 1.5 2.0 2.5 FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 100 1.5 AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TA = 25 OC 10 1.0 0.1 0 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE M D X F 100V 200V 400V 600V 8------ 800V 10----- 1000V DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.