MD7S

0.8 35 35 1 2 3 4 M D 0.028(0.9) .004(0.10) MAX. 0.020(0.5) 0.152(3.6) 0.157(4.0) 0.145(3.6) 0.193(4.9) 0.177(4.5) 0.260(6.6) 0.092(2.34) 0.157(4.0) 2.756(7.0) 0.108(2.74) 0.106(2.7) 0.091(2.3) 0.014(0.35) 0.006(0.15) 0.193(4.9) 0.177(4.5) 0.8 35 35 5 1.0 0.4 o @T A = 25 C o @T A = 150 C NOTES :1. “ROHS compliant” 1.0 200 u u 2021-12/08 REV:E 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 35 20 10 0 0 2 4 6 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( MD1S THRU MD7S ) 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0.01 0 NUMBER OF CYCLES AT 60Hz 1.0 1.5 2.0 2.5 FIG.2 MAXIMUM INSTANTANEOUS FIG.2 MAXIMUMN FORWARD CHARACTERISTICS 100 1.6 AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TA = 25 OC 10 1.0 0.1 0 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 60 80 100 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 REVERSECHARACTERISTICS CHARACTERISTICS FIG.3MAXIMUMN MAXIMUM REVERSE 1.2 0.8 0.4 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE Mounting Pad Layout .276 Max. (7.0 Max.) .105 (2.67) .095 (2.41) .035 Min. (0.90 Min.) Dimensions in inches and (millimeters) .030 Min. (0.76 Min.) Year – code (Y: Last digit of year & A:2010, B:2011...) REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES - MINI DIP P0 P1 d P E F B 4 O W C 8 O T A D D1 D2 W1 Fig.: Configuration of MINI DIP REEL TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width Reel width Notes : D7 SYMBOL A B C d D D1 D2 E F P P0 P1 T W W1 SPECIFICATIONS (mm) 5.0 0.1 3.2 0.1 2.9 0.1 1.5 0.1/-0 178 2.0 8.0 0.2 13 0.5 1.75 0.1 5.5 0.5 8.0 0.1 4.0 0.1 2.0 0.05 2.65 0.1 12.0+0.3/-0.1 16.8 2.0 SPECIFICATIONS (inch) 0.197 0.004 0.126 0.004 0.114 0.004 0.059 0.004 7.008 0.079 0.315 0.008 0.512 0.020 0.069 0.004 0.217 0.020 0.315 0.004 0.157 0.004 0.079 0.002 0.104 0.004 0.472+0.012/-0.004 0.661 0.079 1.Devices are packed in accordance with EIA stand RS-481-D and specifications listed above. 2.Available on 7 inch ( 500 c.t. ) or 13 inch ( 3000 c.t. ) diameter reels. Visit http:// www.rectron.com for complete datasheets PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX MD-S -T 500 2,000 --- --- 178 390*205*310 16,000 5.51 MD-S -W 3,000 6,000 --- --- 330 360*355*360 48,000 14.11 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.