MMBZ5247BW

MMBZ5221BW THRU MMBZ5259BW ZENER DIODE FEATURES˖ ˖ Planar Die Construction 200mW Power Dissipation on FR-4 PCB General purpose, Medium Current Ideally Suited for Automated Assembly P/N suffix V means AEC-Q101 qualified, e.g:MMBZ5221BWV P/N suffix V means Halogen-free Marking: see table on page2 The first code SOT- 323  Maximum Ratings(Ta= 25Я unless otherwise specified) Characteristic Forward Voltage @ IF = 10mA Power Dissipation Thermal Resistance, Junction to Ambient Air
 Temperature Symbol VF PD R©JA Tj Storage Temperature Range T 
 Value 0.9 200 625 Unit V mW -55 ~ +150 Я -55 ~ +150 Я Я/W 2018-01/02 REV:A     Ta=25℃ unless otherwise specified Type Number Marking Code Zener Voltage Range (Note 1) Test Current VZ @ IZT Maximum Zener Impedance (Note 2) IZT ZZT @ IZT ZZK @ IZK = 0.25mA Ω mA Maximum Reverse Leakage Current (Note 1) IR @VR Nom (V) Min (V) Max (V) μA V MMBZ5221BW KC1 2.4 2.28 2.52 20 30 1200 100 1.0 MMBZ5222BW KC2 2.5 2.38 2.63 20 30 1250 100 1.0 MMBZ5223BW KC3 2.7 2.57 2.84 20 30 1300 75 1.0 MMBZ5225BW KC5 3.0 2.85 3.15 20 30 1600 50 1.0 MMBZ5226BW KG1 3.3 3.14 3.47 20 28 1600 25 1.0 MMBZ5227BW KG2 3.6 3.42 3.78 20 24 1700 15 1.0 MMBZ5228BW KG3 3.9 3.71 4.10 20 23 1900 10 1.0 MMBZ5229BW KG4 4.3 4.09 4.52 20 22 2000 5.0 1.0 MMBZ5230BW KG5 4.7 4.47 4.94 20 19 1900 5.0 2.0 MMBZ5231BW KE1 5.1 4.85 5.36 20 17 1600 5.0 2.0 MMBZ5232BW KE2 5.6 5.32 5.88 20 11 1600 5.0 3.0 MMBZ5233BW KE3 6.0 5.70 6.30 20 7 1600 5.0 3.5 MMBZ5234BW KE4 6.2 5.89 6.51 20 7 1000 5.0 4.0 MMBZ5235BW KE5 6.8 6.46 7.14 20 5 750 3.0 5.0 MMBZ5236BW KF1 7.5 7.13 7.88 20 6 500 3.0 6.0 MMBZ5237BW KF2 8.2 7.79 8.61 20 8 500 3.0 6.5 MMBZ5238BW KF3 8.7 8.27 9.14 20 8 600 3.0 6.5 MMBZ5239BW KF4 9.1 8.65 9.56 20 10 600 3.0 7.0 MMBZ5240BW KF5 10 9.50 10.50 20 17 600 3.0 8.0 MMBZ5241BW KH1 11 10.45 11.55 20 22 600 2.0 8.4 MMBZ5242BW KH2 12 11.40 12.60 20 30 600 1.0 9.1 MMBZ5243BW KH3 13 12.35 13.65 9.5 13 600 0.5 9.9 MMBZ5244BW KH4 14 13.30 14.70 9.0 15 600 0.1 10 MMBZ5245BW KH5 15 14.25 15.75 8.5 16 600 0.1 11 MMBZ5246BW KJ1 16 15.20 16.80 7.8 17 600 0.1 12 MMBA5247BW KJ2 17 16.15 17.85 7.4 19 600 0.1 13 MMBZ5248BW KJ3 18 17.10 18.90 7.0 21 600 0.1 14 MMBZ5249BW KJ4 19 18.05 19.95 6.6 23 600 0.1 14 MMBZ5250BW KJ5 20 19.00 21.00 6.2 25 600 0.1 15 MMBZ5251BW KK1 22 20.90 23.10 5.6 29 600 0.1 17 MMBZ5252BW KK2 24 22.80 25.20 5.2 33 600 0.1 18 MMBZ5253BW KK3 25 23.75 26.25 5.0 35 600 0.1 19 MMBZ5254BW KK4 27 25.65 28.35 5.0 41 600 0.1 21 MMBZ5255BW KK5 28 26.60 29.40 4.5 44 600 0.1 21 MMBZ5256BW KM1 30 28.50 31.50 4.2 49 600 0.1 23 MMBZ5257BW KM2 33 31.35 34.65 3.8 58 700 0.1 25 MMBZ5258BW KM3 36 34.20 37.80 3.4 70 700 0.1 27 MMBZ5259BW KM4 39 37.05 40.95 3.2 80 800 0.1 30 Notes: 1. Short duration test pulse used to minimize self-heating effect. 2. f = 1KHz. " " " "" " " RATING AND CHARACTERISTICS CURVES (MMBZ5221BW THRU MMBZ5259BW) Zener CharacteristicsVZ Up to 10 V Zener Characteristics11 V to 39 V 100 100 10 39 36 33 28 30 24 22 1 0.5 10 0.5 1 2 3 4 5 6 7 8 9 10 11 15 20 VZ, ZENER VOLTAGE (V) 25 30 35 40 45 VZ, ZENER VOLTAGE (V) Temperature Coefficients Typical Leakage Current 40 100 Pulsed TYPICAL Ta VALUES 35 FOR MMBZ52XXBW SERIES 10 IR, LEAKAGE CURRENT (uA) θVZ, TEMPERATURE COEFFICIENT (mV/ć) 20 10 25 27 9.1 8.7 8.2 7.5 6.2 6.8 5.1 5.6 6.0 4.7 4.3 1 PD =200mW 11 12 13 14 15 16 IZ, ZENER CURRENT (mA) Pulsed 10 3.0 IZ, ZENER CURRENT (mA) Ta =25ć PD =200mW Pulsed 18 Ta =25ć 30 25 20 VZ @ IZT 15 10 1 0.1 0.01 5 Ta=100ć 1E-3 0 Ta=25ć -5 1E-4 0 4 8 12 16 20 24 28 32 36 40 44 0 5 10 15 20 25 30 35 40 45 VZ, NOMINAL ZENER VOLTAGE (V) V , NOMINAL ZENER VOLTAGE (V) Z Effect of Zener Voltage on Zener Impedance Typical Capacitance 1000 3000 Ta=25ć Ta=25ć 1000 ZZT, DYNAMIC IMPEDANCE(Ω) C, CAPACITANCE (pF) f=1MHz 100 0V BIAS 1V BIAS 10 BIAS AT 50% OF VZ NOM 1 f=1kHz 100 IZT 10 1 1 10 100 1 10 VZ, NOMINAL ZENER VOLTAGE (V) VZ, NOMINAL ZENER VOLTAGE (V) Power Derating Curve 250 200 POWER DISSIPATION PD (mW) IZ(AC)=0.1IZ(DC) IZ=0.25mA 150 100 50 0 0 25 50 75 AMBIENT TEMPERATURE 100 T 125 150 (ć ) " " " "" " " 100   Symbol A A1 A2 b c D E E1 e e1 L L1 θ Dimensions In Millimeters Min Max 0.900 1.100 0.000 0.100 0.900 1.000 0.200 0.400 0.080 0.150 2.000 2.200 1.150 1.350 2.150 2.450 0.650 TYP 1.200 1.400 0.525 REF 0.260 0.460 0° 8° Dimensions In Inches Min Max 0.035 0.043 0.000 0.004 0.035 0.039 0.008 0.016 0.003 0.006 0.079 0.087 0.045 0.053 0.085 0.096 0.026 TYP 0.047 0.055 0.021 REF 0.010 0.018 0° 8°      " " " "" " "  ! DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.