MP158

MP1505 THRU MP1510 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes FEATURES Superior thermal desing 300 amperes surge rating // 1/4 universal faston terminal Hole thru for # 10 screw MP-15 MECHANICAL DATA Max. .311 (7.9) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .583 (14.8) .32 x .252 (0.81 x 6.35) .634 (16.1) Hole for # 10 screw Min f.200 (5.08) .673 (17.1) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 1.142 (29) 1.102 (28) .673 (17.1) .634 (16.1) .693 (17.6) .732 (18.6) .480 (12.2) .425 (10.8) 1.142 (29) 1.102 (28) * * * * Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .543 (13.8) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) o SYMBOL MP1505 MP151 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 Maximum RMS Bridge Input Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 200 RATINGS Maximum Average Forward Output Current at Tc = 55 o C MP152 MP1510 UNITS MP154 MP156 MP158 200 400 600 800 1000 Volts 140 280 420 560 700 Volts 400 600 800 1000 Volts IO 15.0 Amps I FSM 300 Amps I2t 373.3 A2/Sec RMS isolation voltage from case to lead VISO 2500 Volts Typical Thermal Resistance (from junction to case) R θJC 2 Typical Thermal Resistance (from junction to ambient RθJA 19 T J, T STG -55 to + 150 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time Operating and Storage Temperature Range 0 C/W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) o CHARACTERISTICS SYMBOL VF Maximum Forward Voltage Drop per element at 7.5A DC Maximum Reverse Current at Rated @T A = 25 o C DC Blocking Voltage per element @T A = 150 C NOTE: 1. Suffix ”W” for wire type 2. ”ROHS compliant” o MP1505 MP151 MP152 MP154 MP156 MP158 MP1510 UNITS 1.05 Volts 0.5 uAmps IR 500 uA mps 2019-06 REV:D RATING AND CHARACTERISTIC CURVES ( MP1505 THRU MP1510 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 400 300 200 100 0 INSTANTANEOUS FORWARD CURRENT, (A) 1 2 20 15 10 100 10 1.0 .1 TJ = 25 Pulse Width = 300us 1% Duty Cycle 1.2 1.3 .6 .7 .8 .9 1.0 1.1 INSTANTANEOUS FORWARD VOLTAGE, (V) 60 Hz RESISTIVE OR INDUCTIVE LOAD 5 0 0 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS .01 AVERAGE FORWARD CURRENT, (A) 25 8.3ms Single Half Sine-Wave (JEDEC Method) 50 100 CASE TEMPERATURE, ( 150 175 ) FIG. 4 - MAXIMUM REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) PEAK FORWARD SURGE CURRENT, (A) 500 10 1.0 TA= 25 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) Marking Description + AC Part No. Rectron Logo MP15X Voltage-code VYWW Year – code: (Y:Last digit of year) Week – code: (WW:01~52) 05-------50V 1-------100V 2-------200V 4-------400V UL Logo 6-------600V 8-------800V 10-----1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE MP-15/-25/-35 -B EA PER BOX 50 INNER BOX SIZE CARTON SIZE (mm) (mm) 206*208*45.5 450*220*255 EA PER CARTON 500 GROSS WEIGHT(Kg) 9.6 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.