MP351

MP3505 THRU MP3510 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 35 Amperes FEATURES * * * * Superior thermal desing 400 amperes surge rating // 1/4 universal faston terminal Hole thru for # 10 screw MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O Max. .311 (7.9) .480 (12.2) .425 (10.8) 1.142 (29) 1.102 (28) .673 (17.1) .634 (16.1) Hole for # 10 screw Min f.200 (5.08) 1.142 (29) 1.102 (28) .673 (17.1) AC .634 (16.1) .732 (18.6) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .693 (17.6) AC Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .583 (14.8) For capacitive load, derate current by 20%. .543 (13.8) .32 x .252 (0.81 x 6.35) Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) SYMBOL MP3505 MP351 MP352 MP354 MP356 MP358 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 Maximum DC Blocking Voltage VDC 50 100 200 400 600 RATINGS o Maximum Average Forward Rectified Output Current at Tc = 55 C Peak Forward Surge Current 8.3 ms single half sine-wave MP3510 UNITS 1000 Volts 560 700 Volts 800 1000 Volts IO 35.0 Amps I FSM 400 Amps I2t 664 A2/Sec T J, T STG -55 to + 175 superimposed on rated load (JEDEC method) Typical Current Squarad Time Operating and Storage Temperature Range 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) SYMBOL CHARACTERISTICS VF Maximum Forward Voltage Drop per element at 17.5A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 150 C NOTE: Suffix ”W” for wire type o MP3505 MP351 MP352 MP354 MP356 MP358 MP3510 UNITS 1.05 Volts 0.5 uAmps IR 500 uAm ps 2019-09 REV˖F 30 20 10 5 2 1 0.5 0.2 0 Pulse test per one diode 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( MP3505 THRU MP3510 ) 1000 TA = 150 OC 100 1.0 TA = 25 OC 0.1 0 INSTANTANEOUS FORWARD VOLTAGE, (V) AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 1.0 Cycle     NUMBER OF CYCLE AT 60 Hz FIG.3 SURGE FORWARD CURRENT CAPABILITY 60 80 100 120 140 FIG.2 MAXIMUM REVERSE CHARACTERISTICS   40 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.1 TYPICAL INSTANTANEOUS FORWARD CHARACTERITICS T- = T- Max. 0.5 ms Single Sine-Wave 20 50 40 30 20 10 0 10 30 50 70 90 110 130 150 HEAT SINK TEMPERATURE, (OC) FIG.4 TYP PICAL FORWARD CURRENT DERATING CURVE 170 Marking Description + AC Part No. MP35X Rectron Logo VYWW Year – code: (Y:Last digit of year & A:2010,B:2011......) Voltage-code 05-------50V 1-------100V 2-------200V 4-------400V 6-------600V 8-------800V 10-----1000V UL Logo Week – code: (WW:01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE MP-15/-25/-35 -B EA PER BOX 50 INNER BOX SIZE CARTON SIZE (mm) (mm) 206*208*45.5 450*220*255 EA PER CARTON 500 GROSS WEIGHT(Kg) 9.6 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.