MP3516

MP3516 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 1600 Volts CURRENT 35 Amperes FEATURES * * * * Superior thermal desing 400 amperes surge rating // 1/4 universal faston terminal Hole thru for # 10 screw MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O Max. .311 (7.9) .480 (12.2) .425 (10.8) .32 x .252 (0.81 x 6.35) .543 (13.8) .673 (17.1) 1.142 (29) 1.102 (28) .583 (14.8) For capacitive load, derate current by 20%. .634 (16.1) Single phase, half wave, 60 Hz, resistive or inductive load. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .732 (18.6) Hole for # 10 screw Min f.200 (5.08) .693 (17.6) 1.142 (29) 1.102 (28) .673 (17.1) .634 (16.1) o Ratings at 25 C ambient temperature unless otherwise specified. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) o SYMBOL MP3516 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 1600 Volts Maximum RMS Bridge Input Voltage VRMS 1120 Volts Maximum DC Blocking Voltage VDC 1600 Volts IO 35.0 Amps I FSM 400 Amps I2t 664 A2Sec T J, T STG -55 to + 150 SYMBOL MP3516 VF 1.1 Volts 10 uAmps RATINGS o Maximum Average Forward Rectified Output Current at Tc = 55 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time Operating and Storage Temperature Range 0 C ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) o CHARACTERISTICS Maximum Forward Voltage Drop per element at 17.5A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 C NOTE: Suffix ”W” for wire type o IR 500 UNITS uAm ps 2018-06 REV O 30 20 10 5 2 1 0.5 0.2 0 Pulse test per one diode 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( MP3516 ) 1000 TA = 125 OC 100 O T A = 25 C 10 1.0 0 INSTANTANEOUS FORWARD VOLTAGE, (V) NUMBER OF CYCLE AT 60 Hz FIG.3 SURGE FORWARD CURRENT CAPABILITY 60 80 100 120 140 FIG.2 MAXIMUM REVERSE CHARACTERISTICS AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 1.0 Cycle 40 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.1 TYPICAL INSTANTANEOUS FORWARD CHARACTERITICS T = T Max. 0.5 ms Single Sine-Wave 20 50 40 30 20 10 0 10 30 50 70 90 110 130 150 HEAT SINK TEMPERATURE, (OC) FIG.4 TYP PICAL FORWARD CURRENT DERATING CURVE 170 Marking Description + AC Part No. Rectron Logo MP3516 VYWW Year – code: (Y:Last digit of year & A:2010,B:2011......) Week – code: (WW:01~52) Voltage-code 16-------1600V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE MP-15/-25/-35 -B EA PER BOX 50 INNER BOX SIZE CARTON SIZE (mm) (mm) 206*208*45.5 450*220*255 EA PER CARTON 500 GROSS WEIGHT(Kg) 9.6 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.