MSB307S

MSB301S THRU MSB307S SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 3.0 Ampere FEATURES * Good for automation insertion * * * * Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Mounting position: Any MSBS MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O * Halogen-free MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. - + ~ ~ resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) RATINGS SYMBOL MSB301S MSB302S MSB303S MSB304S MSB305S MSB306S MSB307S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Output Current at T C = 110 oC 100 200 400 600 35 70 140 280 420 50 100 200 400 600 800 1000 Volts 560 700 Volts 800 1000 Volts IO 3.0 Amps I FSM 100 Amps I2t 41.5 A2/Sec Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time R JA 25 R JL 15 T J, T STG -55 to + 150 Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range 0 C/W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) o SYMBOL CHARACTERISTICS Maximum Forward Voltage Drop per Bridge VF Element at 3.0A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free). 2. Thermal Resistance: Mounted on PCB. IR MSB301S MSB302S MSB303S MSB304S MSB305S MSB306S MSB307S UNITS 1.1 Volts 1.0 μAmps 500 μ Amps 2016-08 REV:A 120 8.3mS Single Half Sine-Wave JEDEC Method 100 80 60 40 20 0 0 10 20 40 60 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( MSB301S THRU MSB307S ) 10 1 0.1 0.01 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 0 FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 10 4.0 TA = 125OC 1 O TA = 25 C 0 20 40 60 80 0.5 1.0 1.5 2.0 2.5 INSTANTANEOUS FORWARD VOLTAGE, (V) AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) NUMBER OF CYCLES AT 60Hz 100 120 140 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 3.0 2.0 1.0 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 150 PERCENT RATED PEAK REVERSE VOLTAGE, (%) CASE TEMPERATURE, ( OC) FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES - MSBS 1 Fig.: Configuration of MSBS REEL TAPING ITEM Carrier width SYMBOL A SPECIFICATIONS (mm) 0.69 0.1 SPECIFICATIONS (inch) 0.272 0.004 Carrier length B 7.60 0.1 0.299 0.004 Carrier depth C 1.70 0.1 0.067 0.004 0.004 Sprocket hole d 1.50 0.1 0.059 Reel outside diameter D 330.0 2.0 12.992 0.079 Reel inner diameter D1 16.4 2.0 0.646 0.079 Feed hole diameter D2 13.0 0.2 0.512 0.008 Sprocket hole position E 1.75 0.1 0.069 0.004 Punch hole position F 7.5 0.1 0.295 0.004 Punch hole pitch P 12.0 0.1 0.472 0.004 Sprocket hole pitch P0 4.0 0.1 0.157 0.004 Embossment center P1 2.0 0.1 0.079 0.004 Tape width W 16.0 0.3 0.63 0.012 Reel width W1 22.4 1.0 0.882 0.039 PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE MSBS PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 3,000 3,000 9.5 52 330 360*355*360 24,000 9.0 Marking Description - + Rectron Logo 3 A 7 Part No. 7 for all Voltage range ~ V Y WW H ~ Year – code: (Y:Last digit of year& A:2010, B:2011……) Week – code: (WW:01~52) Halogen-free DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.