RB151

RB151 THRU RB157 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.5 Amperes FEATURES * High reverse voltage to 1000V * Surge overload rating to 40 amperes peak * Good for printed circuit board assembly RB-15 MECHANICAL DATA .360 (9.1) * Epoxy: Device has UL flammability classification 94V-O * UL listed the recognized component directory,file #E94233 * Lead: Silver-plated copper leads .340 (8.6) .217 (5.5) .130 (3.3) 1.2 (30.5) MIN. ~~- + .032 (0.8) POS. LEAD MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS + ~ ~ Ratings at 25 o C ambient temperature unless otherwise specified. 1.0 (25.4) MIN. .028 (0.7) + ~ ~ .220 (5.6) - resistive or inductive load. .180 (4.6) .220 (5.6) - .180 (4.6) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RB151 RB152 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A=25 OC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time Typical Thermal Resistance (Note 1) Operating Temperature Range Storage Temperature Range RB153 RB154 RB155 RB156 RB157 UNITS Volts IO 1.5 Amps I FSM 40 Amps I2t 6.64 A 2 /Sec R JA 36 R JC TJ 12 -55 to + 150 T STG -55 to + 150 0 C/W 0 C 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 150 o C NOTES : 1. Thermal Resistance : Heat-sink case mounted. 2. "ROHS compliant". VF IR RB151 RB152 RB153 RB154 RB155 RB156 RB157 UNITS 1.0 Volts 1.0 uA 1.0 mA 2020-08 REV:E INSTANTANEOUS REVERSE CURRENT, (uA) RATING AND CHARACTERISTICS CURVES ( RB151 THRU RB157 ) AVERAGE FORWARD CURRENT, (A) 1.8 1.5 1.2 0.9 0.6 Single Phase Half Wave 60Hz Inductive or Resistive Load 0.375" (9.5mm) Lead Length 0.3 0 0 50 100 150 10000 1000 TA = 150 OC 10 1.0 T A = 25 OC 0.1 0 20 40 60 80 100 120 140 O AMBIENT TEMPERATURE, ( C) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.2 MAXIMUM REVERSE CHARACTERISTICS 50 PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 10 1.0 0.1 TJ = 25 OC Pulse width=300 S 1% Duty Cycle 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Marking Description + Rectron Logo Part No. UL Logo RB15X V Y WW Year – code: (Y:Last digit of year & A:2010,B:2011......) Week – code: (WW:01~52) Voltage-code 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-----1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE RB-15 -B EA PER BOX 1,000 INNER BOX SIZE CARTON SIZE (mm) (mm) 165*252*59 347*320*271 EA PER CARTON 10,000 GROSS WEIGHT(Kg) 11.6 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.