RBU204M

RBU201M THRU RBU207M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * Ideal for printed circuit board * Surge overload rating: 60 amperes peak * Mounting position: Any RBU MECHANICAL DATA .880 (22.3) .140 (3.56) .130 (3.30) .860 (21.8) Epoxy: Device has UL flammability classification 94V-O .740 (18.8) .720 (18.3) .512 (13.0) .080 (2.03) .060 (1.52) .160 (4.1) .140 (3.5) .710 (18.0) .690 (17.5) .085 (2.16) .075 (1.90) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. resistive or inductive load. .210 (5.33) .190 (4.83) .080 (2.03) .065 (1.65) .050 (1.27) .040 (1.02) .100 (2.54) .085 (2.16) .022 (0.56) .018 (0.46) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RATINGS RBU201M RBU202M RBU203M RBU204M RBU205M RBU206M RBU207M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current o at T A = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Current Squarad Time Insulation voltage Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range IO 2.0 Amps IFSM 60 Amps 2 I t 14.9 2 A S Volts Viso 3000 R JC 11 R JA 37 CJ 15 T J, T STG -55 to + 150 0 C/ W pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A = 150 C RBU201M RBU202M RBU203M RBU204M RBU205M RBU206M RBU207M VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. Measureed at 1MHz and applied reverse voltage of 4.0 volts. 1.05 UNITS Volts 0.3 500 uAmps 2018-10 REV:A AVERAGE FORWARD CURRENT, (A) 2.0 1.6 1.2 0.8 Single Phase Half Wave 60 Hz Inductive or Resistive Load 0.4 0 0 50 100 150 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RBU201M THRU RBU207M) 4 1.0 0.4 0.1 0.04 0.01 T A = 25 OC Pulse Width = 300mS 1% Duty Cycle 0 O AMBIENT TEMPERATURE, ( C) 1000 100 TA = 150 OC 10 0.1 TA = 25 OC 0 20 40 60 80 100 1.0 1.5 2.0 2.5 3.0 3.5 FIG.2 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 1.0 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 120 8.3mS Single Half Sine-Wave JEDEC Method 100 80 60 40 20 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Marking Description Rectron Logo RBU20XM Part No. Voltage-code VYWW Year – code (Y:Last digit of year& A:2010, B:2011……) Week – code: (WW:01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) RBU -C 1,000 490*135*110 510*293*131 EA PER CARTON WEIGHT(Kg) 2,000 11.71 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.