RBU2505M

RBU2501M THRU RBU2507M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 25 Amper es FEATURES Low leakage Low forward voltage Surge overload rating : 350 amperes peak Mounting position: Any Ideal for printed circuit boards High forward surge current capability RBU MECHANICAL DATA .880 (22.3) .140 (3.56) .130 (3.30) .860 (21.8) * Epoxy: Device has UL flammability classification 94V-O Top Side .088 (2.2 3) .068 (1.7 2) .160 (4.1) .140 (3.5) .740 (18.8) .720 (18.3) * * * * * * .085 (2.16) .075 (1.90) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .210 (5.33) .190 (4.83) .080 (2.03) .065 (1.65) .050 (1.27) .040 (1.02) .724 (18.4) .705 (17.9) .100 (2.54) .085 (2.16) .026 (0.67) .020 (0.52) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS SYMBOL RBU2501M RBU2502M RBU2503M RBU2504M RBU2505M RBU2506M RBU2507M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T C = 100 C (Note 4) Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Isolation Voltage of case Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range Volts IO 25.0 Amps I FSM 350 Amps I 2t 508 2 A /S V AC VISO 2500 R θJC 2.2 R θ JA 22 T J, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS(@TA=25 C unless otherwise noted) O CHARACTERISTICS Maximum Instantaneous Forward Voltage at 12.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A =150 o C SYMBOL RBU2501M RBU2502M RBU2503M RBU2504M RBU2505M RBU2506M RBU2507M VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 3.Available in Halogen-free epoxy by adding suffix -HF after the part nbr. 4. Heat Sink Temperature. UNITS 1.1 Volts 5.0 uAmps 2.0 mAmps 2018-10/14 REV: B 200 100 PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RBU2501M THRU RBU2507M) TJ = 25 OC 30 10 3 1 0.3 0.1 Pulse Width=300uS 1% Duty Cycle 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 500 400 200 100 50 10 1 5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.1 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 1000 600 400 200 100 10 4 2 1 1 2 4 10 20 40 With Heatsink 25.0 20.0 15.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 10.0 100 0 50 25 75 100 10 TA = 25 OC 20 40 150 CASE TEMPERATURE, ( C) 1000 0 125 FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE FIG.3 TYPICAL JUNCTION CAPACITANCE 0.1 100 O REVERSE VOLTAGE, (V) 1.0 100 30.0 5.0 0.4 50 FIG.2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT AVERAGE FORWARD CURRENT, (A) TJ = 25 OC INSTANTANEOUS REVERSE CURRENT, ( A) JUNCTION CAPACITANCE, (pF) 2000 10 NUMBER OF CYCLES AT 60Hz 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.5 MAXIMUM REVERSE CHARACTERISTICS 140 175 Marking Description Rectron Logo RBU250XM Part No. Voltage-code UL Logo V Y WW Year – code: (Y:Last digit of year A:2010, B: 2011...) Week – code: (WW:01~52) 1-------50V 5-------600V 2-------100V 3-------200V 4-------400V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) RBU -C 1,000 490*135*110 510*293*131 EA PER CARTON WEIGHT(Kg) 2,000 13.62 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.