RBU602M

RBU601M THRU RBU607M SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Amperes FEATURES Low leakage Low forward voltage Silver-plated copper leads Surge overload rating: 150 amperes peak Mounting position: Any RBU MECHANICAL DATA .880 (22.3) .860 (21.8) * Epoxy: Device has UL flammability classification 94V-O .140 (3.56) .130 (3.30) .512 (13.0) .740 (18.8) .720 (18.3) .160 (4.1) .140 (3.5) .080 (2.03) .060 (1.52) * * * * * .085 (2.16) .075 (1.90) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .210 (5.33) .190 (4.83) For capacitive load, derate current by 20%. .080 (2.03) .065 (1.65) .050 (1.27) .040 (1.02) .710 (18.0) .690 (17.5) .100 (2.54) .085 (2.16) .022 (0.56) .018 (0.46) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS SYMBOL RBU601M RBU602M RBU603M RBU604M RBU605M RBU606M RBU607M UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T C = *100 C (Note 3) Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IO 6.0 Amps I FSM 150 Amps I t 93.38 A 2S 2 Typical Current Squared Time Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range Volts Rθ JC 3.5 Rθ JA 26 T J, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL o Instantaneous Forward Voltage at 6.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 C o VF @T A = 125 C o @T A = 25 C @T A = 125o C IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " ROHS compliant" 3. "*" Heat Sink Temperature. TYP MAX .95 1.0 .845 .88 UNITS Volts 1.0 500 uAmps 2019-12 REV: B 8.0 6.0 4.0 2.0 0 0 50 100 150 INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD OUTPUT CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RBU601M THRU RBU607M ) 40 10 6.0 T A =1 2 5 OC 0.4 Pulse Width = 300mS 1% Duty Cycle 0.1 0 O HEAT SINK TEMPERATURE, ( C) PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) TA = 125 OC 10 1.0 TA = 25 OC 0 20 40 60 80 100 0.6 0.4 0.8 1.0 1.2 1.4 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 0.1 0.2 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 100 T A = 25 OC 1.0 120 140 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 MAXIMUM REVERSE CHARACTERISTICS 240 8.3mS Single Half Sine-Wave JEDEC Method 200 160 120 80 40 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Marking Description Rectron Logo UL Logo RBU60XM VYWW Year – code (Y:Last digit of year &A:2010,B:2011……) Week – code: (WW:01~52) Part No. Voltage-code 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) RBU -C 1,000 490*135*110 510*293*131 EA PER CARTON WEIGHT(Kg) 2,000 13.62 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.