RC207

RC201 THRU RC207 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * * * * * Reverse voltage to 600v Surge overload ratings to 50 amperes peak Good for printed circuit board assembly Mounting position: Any Silver-plated copper leads RC-2 MECHANICAL DA TA .360 (9.1) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .340 (8.6) .217 (5.5) .130 (3.3) 1.2 (30.5) MIN. 1.0 (25.4) MIN. ~~- .032 (0.8) + POS. LEAD .028 (0.7) + ~ MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS ~ o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .220 (5.6) - .180 (4.6) .220 (5.6) .180 (4.6) Dimensions in inches and (millimeters) o MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) RC203 RC204 RC205 RC206 VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 SYMBOL RATINGS Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 25oC Peak Forward Surge Current 8.3 ms single half sine-wave RC201 RC207 UNITS RC202 Maximum Recurrent Peak Reverse Voltage Volts IO 2.0 Amps I FSM 50 Amps 10.3 A2/Sec superimposed on rated load (JEDEC method) 2 Typical Current Squarad Time I t Operating Temperature Range Storage Temperature Range TJ -55 to + 150 0 C T STG -55 to + 150 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridge VF Element at 2.0A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 150 C o NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. " ROHS compliant" 3. Equivalent to Vishay's GBU6 Series. RC201 RC202 RC203 RC204 1.05 RC205 RC206 RC207 UNITS Volts 1.0 uAmps 1.0 mAmps IR 2021-07 REV:H RATING AND CHARACTERISTIC CURVES ( RC201 THRU RC207 ) 2.0 50 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 60 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 1.5 1.0 .5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 0 1 2 4 6 8 10 20 40 60 NUMBER OF CYCLES AT 60Hz 100 20 INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 1000 TA = 100 1000 100 10 TA = 25 .6 .2 .1 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 3 - MAXIMUM REVERSE CHARACTERISTICS 80 110 140 170 AMBIENT TEMPERATURE, ( 200 ) FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM FORWARD SURGE CURRENT 1.0 50 140 20 10 7 5 3 1.0 TJ = 25 Pulse Width = 300us 1% Duty Cycle .5 .3 .1 .05 .02 .01 0 .2 .4 .6 .8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 - MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS RECTRON RECTRON 1. Internal Circuit 2. Marking on the body + Rectron Logo Plant - code Year -code (Last digit of year& A:2010, B:2011...) UL Logo VXXX Week - code (W:01~52) RC20X Voltage-code 7---for all Voltage range Part No. PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE RC-2 -B EA PER BOX 1,000 INNER BOX SIZE CARTON SIZE (mm) (mm) 165*252*59 347*320*271 EA PER CARTON 10,000 GROSS WEIGHT(Kg) 11.6 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.