RL1606C

RL1601C THRU RL1607C GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 16 Amperes FEATURES * * * * * * Low power loss, high efficiency Low forward voltage drop Low thermal resistance High current capability High surge capability High reliability TO-220 MECHANICAL DATA * * * * * * Case: TO-220 molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.24 grams Polarity: As marked .108 (2.75) .413 (10.5) .374 (9.5) .153 (3.9) .146 (3.7) .187 (4.7) .148 (3.8) .053 (1.3) .047 (1.2) .270 (6.9) .230 (5.8) .610 (15.5) .583 (14.8) .157 (4.0) .583 (14.8) .531 (13.5) .051 (1.3) .043 (1.1) .035 (0.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .022 (0.56) .102 (2.6) .091 (2.3) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. .014 (0.36) .126 (3.2) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL RL16 01C RL16 02C RL16 03C RL16 04C RL16 05C RL16 06C RL16 07C UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current o T C = 100 C (Note 1) Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range IO 16.0 Amps I FSM 200 Amps RθJC 3.0 0 CJ 40 T J , T STG -65 to + 150 C/ W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) o SYMBOL CHARACTERISTICS Maximum Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current @T C = 25 o C at Rated DC Blocking Voltage @T C = 100 oC NOTES : 1.Case Temperature Measured at Metal Tab. 2.Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 3.Suffix “ A “ = Common Anode. VF IR RL16 01C RL16 02C RL16 03C RL16 04C 1.1 10 RL16 05C RL16 06C RL16 07C UNITS Volts uAmps 100 2016-12 REV:A 1000 16.0 12.0 8.0 Single Phase Half Wave 60Hz Inductive or Resistive Load 4.0 0 0 50 100 CASE TEMPERATURE, ( 150 ) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 8.3ms Single Half Sine-Wave (JEDED Method) 250 INSTANTANEOUS REVERSE CURRENT, (uA) 20.0 200 TC = 100 100 10 TC = 25 1.0 0.1 0 150 100 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 50 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 FIG. 4 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) FIG. 2 - TYPICAL REVERSE CHARACTERISTICS FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 200 100 60 40 20 10 TJ = 25 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 REVERSE VOLTAGE, ( V ) 40 100 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( RL1601C THRU RL1607C ) FIG. 5 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 80 40 20 10 4 1.0 .4 TJ = 25 Pulse Width = 300us 1% Duty Cycle .1 .5 .6 .7 .8 .9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) " " " "" " " RECTRON Attachment information about RL160XC 1. Internal Circuit \ 2. Marking on the bod\ Plant - code Rectron Logo Part No. V X X R L 1 6 0 XC X Year – code (Y: Last digit of year & A:2010,B:2011……) Week – code ˄WW:01~52˅ Voltage-code 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) (I)TO-220/TO-220(A) -C 2,000 550*140*92 572*308*120 EA PER CARTON WEIGHT(Kg) 4,000 11.80 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.