RL1N4001

RL1N4001 THRU RL1N4007 SILICON RECTIFIER VOLTAGE RANGE 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * High reliability Low leakage current Low forward voltage drop High current capability A-405 MECHANICAL DATA * * * * * Case : Molded plastic Epoxy : Device has UL flammability classification 94V-0 Lead : MIL-STD-202E method 208C guaranteed Mounting position : Any Weight : 0.20 gram 1.0 (25.4) MIN. .025 (0.6) DIA. .021 (0.5) .205 (5.2) .166 (4.2) .107 (2.7) DIA. .080 (2.0) 1.0 (25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RATINGS RL1N4001 RL1N4002 RL1N4003 RL1N4004 RL1N4005 RL1N4006 RL1N4007 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 1000 Maximum RMS Voltage VRMS 700 Volts VDC 1000 Volts IO 1.0 Amps I FSM 30 Amps 3.74 A2/Sec Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at TA=55 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 2 Typical Current Squarad Time I t Typical Thermal Resistance Typical Junction Capacitance (Note 1) Operating and StorageTemperature Range ELECTRICAL CHARACTERISTICS 50 CJ 15 TJ,TSTG -55 to + 150 0 C/W pF 0 C (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage R QJA Volts RL1N4001 RL1N4002 VF o @T A = 25 C o @T A = 150 C IR Maximum Full Load Reverse Current Average, Full Cycle .375" (9.5mm) lead length at TL=75OC NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. " ROHS compliant" 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. RL1N4003 RL1N4004 RL1N4005 RL1N4006 RL1N4007 UNITS 1.0 Volts MA 2.0 mA 30 MA 1.0 2020-12 REV:F INSTANTANEOUS FORWARD CURRENT, (MA) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RL1N4001 THRU RL1N4007 ) 2.0 1.5 1.0 0.5 0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0 25 50 75 100 125 150 175 10000 O TA = 150 C 1000 100 10 1.0 TA = 25 OC 0.1 0 20 O 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.2 MAXIMUM REVERSE CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 20 10 JUNCTION CAPACITANCE, (pF) 40 4 2 1.0 .4 .2 .1 T J = 25 Pulse Width=300uS 1% Duty Cycle .04 .02 .01 .6 1.0 1.2 1.4 TJ = 25 OC 20 10 8 6 4 2 1 .8 1.5 0.4 0.1 INSTANTANEOUS FORWARD VOLTAGE, (V) 1.0 4 40 80 FIG.4 TYPICAL JUNCTION CAPACITANCE 30 8.3mS Single Half Sine-Wave JEDEC Method 25 20 15 10 0 1 10 REVERSE VOLTAGE, (V) FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (A) AMBIENT TEMPERATURE, ( C) 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIIVE FORWARD SURGE CURRENT RADIAL-TAPING SPECIFICATIONS FOR RECTIFIERS-PANASERT h P2 h P D h h A H1 P1 H L W1 W2 L1 H0 F W0 A W D0 P0 T t detail A d feeding direction Fig.: Configuration of PANASERT CODING A: LEAD FORMING OUTLINE CODE B: COATING LEAD FORMING OUTLINE CODE(A) N: PANASERT ITEM Body diameter Body height Lead-wire diameter Component pitch Feed hole pitch Component lead spacing Deflection Tape width Hold-down tape width Hole position Length from seating plane Component height Feed hole diameter Total tape thickness Cut out length Lead-wire (taped portion) Lead protrusion Lead-wire clinchh height Feedhole center to lead Center of seating plane location Adhesive tape position SYMBOL D A STANDARD PACKAGING/(EA) - Notes : d P P0 F h W W0 W1 H H1 D0 t L L1 T H0 P1 P2 W2 SPECIFICATIONS(mm) 2.7 Max. SPECIFICATIONS(inch) 0.106 Max. 5.2 0.5 0.6 0.1 12.7 1.0 12.7 0.3 5.0+0.4/-0.1 0.0 1.0 18.0 0.5 0.205 0.020 0.024 0.004 0.500 0.039 0.500 0.012 0.197+0.016/-0.004 0.000 0.039 0.709 0.020 12.5 Min. 9.0+0.75/-0.50 19.5 1.0 0.492 Min. 0.354+0.030/-0.020 0.768 0.039 32.25 Max. 1.27 Max. 4.0 0.2 1.5 Max. 11.0 Max. 2.5 Min. 0.157 0.008 0.059 Max. 0.433 Max. 0.098 Min. 0.8 Max. 16.0 0.5 0.031 Max. 0.630 0.020 3.85 6.35 0.152 0.250 0.7 1.0 0.5 Max. 0.028 0.039 0.020 Max. TAPE REEL / 2K/BOX/2K 1.Packaging per EIA/JEDEC standard RS-468. Available only for A-405 product utilizing 0.6mm diameter leads. 2.Maximum cumulative pitch tolerance:1.0mm/20pitch. 3.Lead Insulation coating allow to be exposed 1.5mm Max. from body. Mark Description Plant - code V Y M Rectron Logo Part No. 1N400H Cathode Band Year – code (Y: Last digit of year & A:2010,B:2011…..) Month – code (M:1~9, O, N ,D) H---for all Voltage rang PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE A-405 -B EA PER BOX INNER BOX SIZE (mm) 1,000 194*84*21 CARTON SIZE EA PER CARTON (mm) 415*220*255 50,000 GROSS WEIGHT(Kg) 15.64 REEL PACK PACKAGE PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX DO-41 5,000 5.0 -T 5,000 PACKAGE PACKING CODE REEL ( EA ) DO-41 -F 3,000 5.0 52 DO-41 -E 3,000 5.0 A-405 -N 2,000 12.7 52 330 355*350*335 20,000 8.13 AMMO PACK COMPONENT TAPE SPACE SPACE(mm) (mm) BOX SIZE (mm) CARTON SIZE(mm) CARTON ( EA ) GROSS WEIGHT (Kg) 255*73*100 400*268*225 30,000 9.6 26 256*48*94 365*270*217 42,000 9.61 --- 325*170*40 355*350*335 28,000 11.41 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.