RS1001M-C-LV

RS100xM -C-LV SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 6 00 Volts CURRENT 10 Amperes FEATURES Low leakage Low forward voltage Mounting position : Any Surge overload rating: 200 Amperes peak Ideal for printed circuit boards MSL: Level 1 * Halogen-free .057 (1.45) .041 (1.05) .083 (2.1) .069 (1.7) .114 (2.9) .098 (2.5) .146 ( 3.7 ) .130 ( 3.3 ) .708 ( 18.0 ) .669 ( 17.0 ) .074 (1.9) .059 (1.5) .043 (1.1) .035 (0.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .122 (3 .1 ) .157 ( 4 ) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .189 (4.8) .173 (4.4) .150 (3.8) .134 (3.4) f.134 ( 3.4 ) MECHANICAL DATA .366 (9 .3 ) .995 (25.3) .983 (24.7) .382 (9 .7 ) RS-10M .602 (15.3 ) .578 (14.7) * * * * * * .031 (0.8) .023 (0.6) O Ratings at 25 C ambient temperature unless otherwise specified. resistive or inductive load. .303 (7.7) .287 (7.3) .303 (7.7) .287 (7.3) .303 (7.7) .287 (7.3) Dimensions in inches and (millimeters) o MAXIMUM CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS SYMBOL RS1001M RS1002M Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage VRMS 35 Maximum DC Blocking Voltage VDC 50 Maximum Average Forward Rectified Output Current at Tc=100 degree with heatsink RS1003M RS1004M RS1005M UNITS 100 200 400 600 Volts 70 140 280 420 Volts 100 200 400 600 Volts IO 10 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load IFSM 200 Amps Typical Current Square Time I 2T 165.9 A 2S Insulation voltage Viso 3000 Volts Typical Thermal Resistance from junction to ambient R JA 22 Typical Thermal Resistance from junction to case R JC 1.0 O C/W Operating and Storage Temperature Range -55 to + 150 TJ,TSTG O C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) SYMBOL CHARACTERISTICS Maximum Forward Voltage Drop per element at 5.0A DC Maximum Reverse Current at Rated DC Blocking Voltage per element VF TA=25 OC TA=150 OC IR RS1001M RS1002M RS1003M RS1004M RS1005M UNITS 0.9 Volts 5.0 Amps 1.0 mAmps 2019-06 REV: B 10 5 o TC = 150 C (TYP) 2 o TC= 25 C (TYP) 1 0.5 0.2 pulse test per one diode 0.1 0.2 0.4 0.6 0.8 1 1.2 1.4 300 sine wave 0 8.3ms 8.3ms 1 cycle non-repetitive o Tj=25 C 200 100 0 1.6 1 2 5 Tc 8 6 sine wave R-load on heatsink 4 2 90 100 110 120 130 140 150 2 1 0 160 P.C.B soldering land 5mmf sine wave R-load free in air 0 40 CASE TEMPERATURE⧊ C⧋ 80 FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE 1.6 with thermal compound 1.5 1.4 1.3 1.2 1.1 2 120 AMBIENT TEMPERATURE( C) FIG.3 TYPICAL FORWARD CURRENT DERATING CURVE 1 3 100 3 o 80 50 on glass-epoxi substrate o 0 20 FIG.2 SURGE FORWARD CURRENT CAPABILITY 4 AVERAGE FORWARD CURRENT, (A) heatsink Tc 10 NUMBER OF CYCLE FIG.1 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS THERMAL RESISTANCE (oC/W) AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS FORWARD VOLTAGE, (V) 10 IFSM 30 20 PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RS100xM- C - L V ) 4 5 6 7 MOUNTING RORQUE (Kg.cm) FIG.5 CONTACT THERMAL RESISTANCE 8 160 Marking Description Rectron Logo RS100XM Plant - code UL Logo Year – code (Y: Last digit of year & A:2010, B:2011…..) Part No. Voltage-code V Y WWH H l alogen-free Week – code (WW: 01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) RS-4M/-10M -C 900 540*118*118 560*259*144 EA PER CARTON WEIGHT(Kg) 1,800 12.82 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.