RS1004MLS

RS1001MLS THRU RS1007MLS SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 10 Amperes FEATURES * * * * * * RS-10MLS Low leakage Low forward voltage Mounting position : Any Surge overload rating: 150 Amperes peak Ideal for printed circuit boards MSL: Level 1 MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS O Ratings at 25 C ambient temperature unless otherwise specified. resistive or inductive load. MAXIMUM CHARACTERISTICS ( @ TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL RS1001MLS RS1002MLS RS1003MLS RS1004MLS RS1005MLS RS1006MLS RS1007MLS UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage V DC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Output Current at Tc=95 O C degree with heatsink IO 10 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 Amps Typical Current Square Time I 2T 93.37 A 2S Insulation voltage Viso 3000 Volts Typical Thermal Resistance from junction to ambient R1JA 28 Typical Thermal Resistance from junction to case R1JC 2.8 TJ,TSTG -55 to + 150 O Operating and Storage Temperature Range C/W O C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) CHARACTERISTICS Maximum Forward Voltage Drop per element at 5.0A DC Maximum Reverse Current at Rated DC Blocking Voltage per element SYMBOL RS1001MLS RS1002MLS RS1003MLS RS1004MLS RS1005MLS RS1006MLS RS1007MLS UNITS VF 烏TA=25 OC 烏TC=100 OC Note: "Fully ROHS compliant", "100% Sn plating (Pb-free)". IR 1.1 Volts 0.2 MAmps 50 M Amps 2017-05 REV: O47 10 5 2 1 0.5 pulse test per one diode 0.1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 sine wave 0 8.3ms 8.3ms 1 cycle non-repetitive o Tj=25 C 200 100 0 1 8 6 4 2 0 80 90 100 110 120 130 140 150 CASE TEMPERATURE⧊ C⧋ FIG.3 TYPICAL FORWARD CURRENT DERATING CURVE 5 10 20 50 100 FIG.2 SURGE FORWARD CURRENT CAPABILITY 4 AVERAGE FORWARD CURRENT, (A) 10 2 NUMBER OF CYCLE FIG.1 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS o AVERAGE FORWARD CURRENT, (A) INSTANTANEOUS FORWARD VOLTAGE, (V) 160 on glass-epoxi substrate 3 P.C.B soldering land 5mmf sine wave R-load free in air 2 1 0 0 40 80 120 o 0.2 300 IFSM 30 20 PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( RS1001MLS THRU RS1007MLS ) AMBIENT TEMPERATURE( C) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE 160 Marking Description Rectron Logo RS100XM Plant - code Voltage-code V Y WW Year – code (Y: Last digit of year & A:2010, B:2011…..) Part No. Week – code (WW: 01~52) 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7-------1000V RS-10MLS " " " "" " " PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE RS-10MLS -B EA PER BOX 250 INNER BOX SIZE (mm) 300*138*35 CARTON SIZE (mm) 319*296*165 EA PER CARTON 2000 GROSS WEIGHT(Kg) 9.7 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.